Best 9 how to balance a door

Below is the best information and knowledge about how to balance a door compiled and compiled by the lifefindall.com team, along with other related topics such as:: balance door hinges, how to make a door close by itself, how to keep a door open without a door stop, door not closing flush, how to adjust door hinges so door closes, how to fix a door that won’t stay closed, how to fix ghosting doors, how to stop a door from swinging closed on its own.

how to balance a door

Image for keyword: how to balance a door

The most popular articles about how to balance a door

Fix a Door that Closes or Opens by Itself – Home Repair Tutor

  • Author: homerepairtutor.com

  • Evaluate 4 ⭐ (36680 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Fix a Door that Closes or Opens by Itself – Home Repair Tutor You’ll be kicking yourself for not doing it sooner. Before this fix, we had to use a doorstop to keep our bathroom door open. Otherwise, it would always close …

  • Match the search results: This is not a proper fix, but what many different industry calls a “hack”. Yea, it’s fast and easy, but *doesn’t solve* the ultimate problem – the door jamb is not plumb. And the fix described in the article may only be temporary.
    Take a level and lay it on the vertic…

  • Quote from the source:

How to Adjust a door that rubs, doesn’t shut or is sagging

  • Author: www.carpentry-tips-and-tricks.com

  • Evaluate 3 ⭐ (13416 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Adjust a door that rubs, doesn’t shut or is sagging Fixing doors that don’t latch properly when you close them; How to stop a door from opening or closing on it’s own; How to adjust kitchen cabinet doors in/out …

  • Match the search results: I fit my door linings so they are a few millimetres too wide for the door. After I have hung the door I can loosen the screws holding the door frame in place and bang small wedges in between the frame and wall. This is why I install the architrave last, it allows me the opportunity to square or stra…

  • Quote from the source:

How to fix doors that won’t stay put – The Washington Post

  • Author: www.washingtonpost.com

  • Evaluate 3 ⭐ (8132 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to fix doors that won’t stay put – The Washington Post Q: Three interior doors are out of plumb. One swings closed unless it’s more than halfway open and has been that way since we bought the …

  • Match the search results: If gaps around the door appear even, the top hinge might be more to the left or right as you stand in the doorway and look at the side doorway trim. To cut a deeper recess for one of the hinges so they line up requires taking down the door, which isn’t easy if the door is heavy. But this quick fix s…

  • Quote from the source:

Balancing doors in the frame – Fine Homebuilding

  • Author: www.finehomebuilding.com

  • Evaluate 3 ⭐ (19105 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Balancing doors in the frame – Fine Homebuilding How can I “balance” interior doors so that they do not open and close themselves when unlatched. I am guessing that shimming the hinges against …

  • Match the search results: Once you get the hinges close to plumb, you may have to shave the door down a bit.  Using a straightedge with a circular saw, then planing or sanding smooth is probably the best way.  If you’ve moved the door a lot you may have to move the strick plate up or down.  Sharpen those chise…

  • Quote from the source:

How to Balance a Garage Door: Checking & Repair [Full Guide]

  • Author: stigaragedoor.com

  • Evaluate 3 ⭐ (3579 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Balance a Garage Door: Checking & Repair [Full Guide] If your garage is not level, it’s unbalanced. Look how to balance a garage door, check how to adjust springs, and more.

  • Match the search results: Before we move on to how to balance a garage door, let’s discuss what it means when the door is unbalanced. First, let’s consider what garage door balance entails. A garage door relies on tension springs to evenly distribute its weight. This makes the openers work easier as the door opens and closes…

  • Quote from the source:

How to rebalance a door that closes on its own – Deseret News

  • Author: www.deseret.com

  • Evaluate 3 ⭐ (4512 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to rebalance a door that closes on its own – Deseret News The second technique requires that you remove the door pin from the bottom hinge. Then bend the pin slightly by striking its head gently with a …

  • Match the search results: A: Your house has settled, so the door is no longer hanging level in its frame — that’s why the door closes by itself. Carpenters I’ve talked with over the years recommend that something be wedged between the lower hinge and the frame of door. This will compensate for the settling and help level the…

  • Quote from the source:

How To Fix A Door That Won’t Stay Open Or Closed

  • Author: doordesignlab.com

  • Evaluate 3 ⭐ (5565 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Fix A Door That Won’t Stay Open Or Closed It is because sometimes doors won’t stay closed only because of some loose hinges. Step 2: Fix a Door Gap Problem. Shut the door to notice if …

  • Match the search results: Use a door stopper to provide support to the door at the right level. Start loosening the hinge screws. Place a shim between the frame of the door and the hinge. Tighten the door screws to check the alignment of the door. If it doesn’t help, move to the next step.

  • Quote from the source:

Top 4 Signs your Garage Door is Unbalanced

  • Author: www.precisiondoordelaware.com

  • Evaluate 3 ⭐ (14368 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Top 4 Signs your Garage Door is Unbalanced To understand what to look for in an unbalanced door, first you have to understand the concept of door balance and understand how to balance a garage door.

  • Match the search results: If you’re a Delaware or North Maryland homeowner whose door has failed the balance test, call Precision Garage Door of Delaware. Our technicians are certified by the International Door Association and know exactly what to do to get your door back in balance and back to working like it should.

  • Quote from the source:

How to Check If Your Garage Door Is Balanced

  • Author: store.geniecompany.com

  • Evaluate 3 ⭐ (1989 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Check If Your Garage Door Is Balanced When a garage door is balanced, it means that the torsion springs are … If the spring is out of balance or broken, the door could crash …

  • Match the search results: When a garage door is balanced, it means that the torsion springs are doing the lifting of the door and that the weight is evenly distributed on the springs.   If a garage door is not balanced, it can be very dangerous.  An unbalanced door places strain on the garage door, garage door opener, and it…

  • Quote from the source:

Multi-read content how to balance a door

Do you have a self-closing or self-opening door?

It’s a project that won’t take long and will make your life so much better. You’ll be sorry you didn’t do it sooner.

Before this solution, we had to use a door to keep our bathroom door open.

Otherwise, it will always close on its own (sound familiar?).

It’s okay unless you have a small bathroom and the door closes while you brush your teeth. One day I thought someone had knocked me over while I was spitting out toothpaste. But that’s just the door, LOL.

Anyone can do this fix in less than 10 minutes.

Here are the supplies you will need

  • hammer
  • wood chips
  • Screwdriver
  • WD-40

Are you ready to stop your door from closing by itself? let’s start

Step One: Remove the Old Hinge Pin

Interior bathroom or bedroom doors that close by themselves are aggravating factors.

The easiest solution is to remove your center hinge pin and bend it slightly.

When I say “light” I mean a barely noticeable bend.

Remove the latch by placing the screwdriver under the center hinge.

Fix a Door that Closes & Opens by Itself-Remove the middle hinge pin

Hammer the screwdriver until the pin pops out of the hinge and can be pulled out by hand.

Old latches may need to be loosened in another way. You may need to insert a flathead screwdriver between the end of the pin and the end of the hinge.

Gently tap the screwdriver with a hammer until a space is created between the end of the pin and the end of the hinge. Place the screwdriver under the spindle head. Then hammer the tip of the pin until you can pull it out by hand.

Removing the center hinge pin allows the door to stay in place via the top and bottom hinges.

If your door has only two hinge pins, close it completely and remove the hinge while the door is in this position. The lever on the doorknob will help keep the door hinges aligned while you remove the latch.

Step Two: Bend gently into the old hinge pin

Place your hinge pin on a piece of scrap wood.

To findsecond nameof the dowel and tap it gently with a hammer until it bends slightly. It only took me three hits with my hammer.

Fix a Door that Closes & Opens Itself-Place a bend in the hinge pin

This flex will provide enough friction to prevent the door from closing or opening on its own.

Replace the pin on the hinge and drive it in with a hammer.

Check your door.

I bet my childhood baseball card collection is still in place.

If the door still opens or closes on its own, you can bend the latch a little more until this no longer happens. Here is a short video sharing this step by step tutorial.

Any squeaking can be eliminated by spraying WD-40 on the door hinge pin.

This may seem counterintuitive since the purpose of pin bending is to create friction. But the WD-40 is not made to open or close the door.

And after?

Now you can add another skill to your DIY toolbox. Pretty cool!!

Oursrolling door repair guidealso very useful if the door is rubbing against the floor or getting stuck – this is invaluable.

If you are renovating your bathroom and need help,take one of our online courses- they will make your bathroom renovation so much easier!

Let me know if you have any questions and I’ll do my best to help.

Thanks as always for reading, watching and being part of our amazing community.

Congratulations,

I f

door repair

  1. Valorie Fitzpatrick says:

    April 4, 2013 at 11:00 a.m.

    Another great tutorial, thank you!
    Another question for you – the doors were closed but are no longer? Last weekend we were at my wife’s house and none of the doors closed unless you pushed hard and jerked the handle, I think it has something to do with the door frame or The door handle ?. No suggestions?

    To respond

  2. Jeff Patterson says:

    April 4, 2013 at 11:19 am

    Good question, Valorie.
    You describe a very common problem. You can either realign the guard to fit the door lock or adjust the hinge.
    Close the door and look at the space between it and the door frame. If this space is smaller than at the bottom of the door, it means that the door has “sagged”.
    This is a common problem with bathroom doors that have towels hung on them. Over time, the thick towel will pull the top hinge out of the mortise (the hinge groove is on the inside).
    You can tighten the hinge to see if that helps, or you can pinch the bottom hinge slightly to make the door work again. Doing the door with a plumb line will allow the door lock to work.
    Just last night my daughter pointed out that the bathroom door was pulling on the floor. So I can put together a guide on the matter. Hope this helps in the meantime.

    To respond

    Valorie Fitzpatrick says:

    April 4, 2013 at 11:26 p.m.

    That would be awesome Jeff! I’m not here to help them fix the door, so I can direct them to your tutorial. They have received new real wood interior doors within the last 4-5 years, wondering if the door is too heavy for the hinges? That would make sense since it’s multiple doors, all with the same problem! You managed to make me think!

    To respond

    Jeff Patterson says:

    April 5, 2013 at 8:53 am

    The other issue I’ve seen is that the hinge is screwed in to cut with a 3/4 inch screw.
    They can always remove these screws and use longer screws, such as 1.5 or 2 inches in length.

    To respond

    Rita Johnson says:

    March 29, 2018 at 2:44 p.m.

    My bathroom door does the same as yours. Does it have something to do with hollow doors and solid doors? Help me!!!!!

    stacey says:

    March 1, 2016 at 1:30 p.m.

    How do I bend the latch at the hinge so it won’t close on me?

    To respond

  3. Nancy @ Artsy Chicks Rule says:

    April 4, 2013 at 12:14 p.m.

    So incredible. I have one ! The door to our guest bathroom…drives me crazy. Thanks for the fix!

    To respond

  4. Jeff Patterson says:

    April 4, 2013 at 12:23 PM

    It also drives my wife crazy!!!!
    Here’s the wacky part – even though our door was fixed, I still found myself reaching for the old door stop. Haha.

    To respond

  5. Terri Hoke says:

    April 9, 2013 at 12:07 pm

    Thanks for the guide, but I have a door with only two hinges. Should I bend the top pin or the bottom pin?
    Post Scriptum. If you don’t have WD40, you can use any type of cooking spray to get rid of the squeak. Just make sure you have a tissue or rag under the hinge when spraying.

    To respond

  6. Jeff Patterson says:

    April 9, 2013 at 12:10 PM

    Thanks to Terri for the cooking spray tip. I had to take Pam to work
    If you only have two hinges, remove and bend one bottom hinge. Hope this solves the problem.
    Let me know how.

    To respond

    kathy donnelly says:

    February 28, 2021 at 1:45 a.m.

    I can’t get the pin out. I removed the paint that had accumulated on it but it wouldn’t budge. No advice?

    To respond

  7. Pingback: Repair cracked floors in 4 easy steps with the Squeeeeek No Extra Floor Repair Kit
  8. Susan @ SunpowerHugs.blogspot.com says:

    April 18, 2013 at 3:39 p.m.

    I’ve only done this for 2 doors in my house that closed on their own for 3 years!! It took me 5 minutes and they were fixed. Yay!! Thank you!

    To respond

  9. Jeff Patterson says:

    April 19, 2013 at 05:44

    Susan, well done!! It’s the greatest feeling in the world when you accomplish something that you once thought was very difficult but wasn’t.

    To respond

  10. Cheryl says:

    August 25, 2013 at 4:29 p.m.

    Thanks for the advice on the door that keeps closing. I tried to bend the middle hinge and in 5 minutes it was fixed. Thanks again. Good advice.

    To respond

  11. Jeff Patterson says:

    August 26, 2013 at 8:57 p.m.

    Hi Cheryl,
    Cool way. Doors can be messy, but it looks like you fixed your door.

    I f

    To respond

  12. Rob says:

    February 14, 2014 at 2:08 PM

    For a second I thought you were [email protected]$$ when I read “How to fix a door that’s closing or opening by itself” and saw a picture of you pointing at a barricade! Thanks for this fix. It worked perfectly and now I can find something else to drive me crazy!

    To respond

  13. Jeff Patterson says:

    February 16, 2014 at 09:29

    Haha, that funny Rob.
    Our door actually opened by itself and when I finally managed to fix it, my wife was furious. She said I had been holding on for the last 3 years and it should have been done sooner.
    Oh, the problem is now solved and I’m glad my adventure helped you.

    To respond

  14. WG Voight says:

    May 5, 2014 at 1:14 p.m.

    I’d rather not fix the symptom by bending things than find the cause. I took a long piece of string (about 80″) and made a plumb line by attaching a weight to one end. Then I held the rope at the top of the latch so the rope separated the two outer screw ends on the top hinge, with the weight on the bottom hinge. What I found was that the bottom hinge was out of place 5/8″… the thread was actually on the outside of the center screw of the bottom hinge.

    To respond

  15. Jeff Patterson says:

    May 9, 2014 at 6 a.m.

    Good tip WG, thanks for sharing

    To respond

    Dana says:

    November 25, 2014 at 5:17 p.m.

    I prefer your solution! Easy fix, thanks.

    To respond

    Jeff Patterson says:

    December 1, 2014 at 5:57 p.m.

    Thanks Dana. It is useful in this regard. I know my wife was thrilled it worked like a champ!

    To respond

  16. Nino says:

    March 8, 2015 at 10:50 p.m.

    I found this home repair video that seemed like an easy fix to my self closing door. I was skeptical at first, but 5 minutes later I believed it. IT WORKS!!! Thanks very much.

    To respond

  17. Sandy says:

    March 21, 2015 at 10:46 a.m.

    After leaving my self-closing closet door open for 7 years, I finally decided that today was the day it would open…and thanks to you, it did! Such a quick and easy solution!

    To respond

  18. Gavin says:

    August 13, 2015 at 06:32

    I had trouble with a door that couldn’t be opened because the frame (and the wall) wasn’t right: it was an old house. After much research I found a spring hinge with an opening action. I installed it as an additional hinge, between the existing hinges, as it wouldn’t be stiff enough to replace the hinge and it worked just to give the door enough thrust to withstand the closing impact of gravity. Now I can stand next to the door without her constantly rushing at me. The only downside is that it’s not aesthetically perfect: I could only find spring hinges with a silver finish and brass door hinges.

    To respond

  19. j.b. speak:

    October 16, 2016 at 8:32 am

    Can you spray paint the hinges, I know it will give me the wrong colors. It’s great that the problem is finally solved.

    To respond

  20. Genia says:

    September 23, 2015 at 1:01 PM

    Oh my word, thank you! My son’s stupid bedroom door always closes when it’s on. I hammered it several times to barely bend the pin, but in the end it was perfect. Now the door is always open. I can’t wait to show my husband… who I’ve been asking to fix this for months. Mwah!

    To respond

  21. Joe says:

    November 7, 2015 at 7:12 p.m.

    My door creaked, so I oiled the hinges. Then it is silent, but opens on its own. I should look here for a solution first. Rather than noticing that none of the walls, railings, or doors are leaded (about 3/16″ from top to bottom), so my solution was to move the bottom hinge 3/16″. It works perfectly, but doesn’t look good because the door and the railing are not aligned. I’m trying to decide if I should leave it as is or move the hinge back and bend the latch.

    To respond

  22. stacey says:

    March 1, 2016 at 1:28 p.m.

    How the fuck do you fold that thing! ?

    To respond

  23. tom said:

    March 25, 2017 at 1:25 p.m.

    I used a hat to secure the pin just below the midpoint, then hit it several times with a crowbar. if I don’t have something I’ll probably do what it says and put it on a piece of scrap wood (like a piece of 2×4 or whatever is lying around) then slam it in the middle a few times with a hammer.

    To respond

  24. Nick Zubak says:

    April 13, 2016 at 4:56 a.m.

    As a GC since ’92 never known that TY thing

    To respond

  25. James said:

    April 27, 2016 at 10:23 p.m.

    In my house there are 3 self-closing and 2 self-opening cabinets and it’s been maybe 5 years. It took 5 minutes to fix all 5 doors. I wish I had looked for this years ago. Thank you!

    To respond

  26. Jeff Patterson says:

    May 1, 2016 at 6:48 am

    Great job Jack!!! Please share your successes. I was in the same boat as him and my wife asked me “why didn’t you do it sooner?”
    Lol now we both know the solution

    To respond

  27. Darrel says:

    June 6, 2016 at 7:49 p.m.

    The bending of the center hinge actually prevented our door from closing automatically.
    Thanks for the successful tip!

    To respond

  28. Kevin says:

    June 11, 2016 at 9:46 p.m.

    Perfect job thank you!!!!

    To respond

  29. Ron Leighton says:

    October 29, 2016 at 11:52 am

    The solution is very simple but very effective. Thanks for sharing your experience.

    To respond

  30. Sam says:

    November 10, 2016 at 7:22 p.m.

    Ok so I have a ball bearing hinge so none of the latches come out… any other suggestions?

    To respond

  31. Sherry says:

    October 31, 2017 at 12:46 a.m.

    We had the same issue as Sam (commented on above) and still no one answered.
    We have ball bearing hinges or sealed hinges (no removable hinge pins) so how do we stop our doors from closing on their own???

    To respond

  32. Mike Griffin says:

    January 18, 2017 at 12:36 PM

    Thanks for the simple tip! I had to hammer the pin a few times and add a little more force to make it work, but it worked fine in the end! Very inspired, I fixed a second door. Now when my wife comes home from work and asks me what I’ve been doing all day (I’m retired), I get a great answer!

    To respond

  33. Sendy says:

    February 5, 2017 at 3:43 p.m.

    I bought my house 13 years ago and have always used sliding doors. I had three doors to fix and after watching this video they were fixed in about 10 minutes. TO THANK!!!!

    To respond

  34. Jeff says:

    March 4, 2017 at 11:22 p.m.

    I can barely wait until tomorrow morning to try this. My garage door closes by itself. A typical situation is that I would walk into my garage without the lights on, just to grab a tool from the other side. Before I could grab it, the door closed and I was standing there in the dark. I had to go back to the door to turn on the light. You won’t believe how many times a day this happens.

    To respond

  35. tom said:

    March 25, 2017 at 1:20 p.m.

    work as a resident. to thank!!!

    To respond

  36. MaxJones says:

    March 28, 2017 at 2:31 p.m.

    I think it’s smart to put a little flex on the hinge! It makes sense that this makes the hinge a bit tighter. However, I thought a professional would come and help me fix the door as I’m not the most handy person. I’ll see if the pros use these tactics. Thank you!

    To respond

  37. Carl Fillerup says:

    April 17, 2017 at 3:45 p.m.

    I just did this and it worked! Thanks very much. Only scored a major score with the woman because the door drove her crazy!

    To respond

  38. Jeff Patterson says:

    April 18, 2017 at 9:05 p.m.

    Well done Carl. And I’m glad you scored with Mrs. Filerup

    To respond

    Todd says:

    February 27, 2020 at 10:19 p.m.

    Wouldn’t SW grease be better than wd40 or are you using it to help create more friction? I’ve always heard that WD attracts more dirt, but for this situation that’s probably a good thing. That problem aside, would white lithium grease be better?

    To respond

  39. Andre says:

    May 22, 2017 at 7:13 a.m.

    You are a genius, I will try that tomorrow. This door is driving me crazy.

    To respond

  40. David Hathaway says:

    July 1, 2017 at 1:09 p.m.

    Your phantom door solution worked perfectly. Thanks for your support.

    To respond

  41. Paul says:

    July 7, 2017 at 4:55 p.m.

    You are a genius! I usually put a cotton ball under the rug in front of the bathroom door to keep the bathroom door open.
    What a simple solution. I know I’m going to sleep tonight! Thanks thanks.

    To respond

  42. Rocco says:

    July 15, 2017 at 2:29 p.m.

    Very good advice. Annoyed by the bathroom door slamming on my back as I was at the sink. You can keep the collection of baseball cards from your childhood.

    To respond

  43. Kurt Carter says:

    October 15, 2017 at 1:23 p.m.

    Your childhood baseball card collection is safe.
    Shit, it stinks easily and the queen (my lovely wife) is pretty happy. three doors 5 minutes; End of month of disappointment. I should have looked for you much sooner. Thanks very much

    To respond

  44. Marc S. says:

    November 11, 2017 at 6:25 p.m.

    Thank you! A simple solution to a very confusing problem. I’m so glad I stumbled upon this!

    To respond

  45. Michael said:

    December 21, 2017 at 10:44 a.m.

    Man this is hilarious, it works like a charm!!

    To respond

  46. Jeff Patterson says:

    December 28, 2017 at 7:42 am

    It does, but totally works. The remedy is very simple but effective in the long term. Glad that helped.

    To respond

  47. Oxy Moron says:

    December 24, 2017 at 4:05 p.m.

    Brilliant. I fixed two doors in 10 minutes. Thanks very much.

    To respond

  48. Jeff Patterson says:

    December 28, 2017 at 7:41 am

    You have done a very good job. It’s amazing how simple this troubleshooting can be. Glad the guide helped.

    To respond

  49. KK says:

    January 7, 2018 at 2:56 p.m.

    Thanks Jeff! I only used it at my parents and theirs. Works like a charm!

    To respond

  50. Jeff Patterson says:

    January 8, 2018 at 5:56 am

    So incredible ! Thank you Karim for sharing your success. It’s crazy that this problem is so easy to solve, I wish I had done it sooner.

    To respond

  51. Kim Dubendorfer says:

    January 8, 2018 at 8:59 am

    Made 3 door, works like a charm. The main door opened too quickly, it was as if the wall it hit was going to fall. I’m going to have to bend the hinge 90 degrees. I know that is not possible. How can I stop this heavy, fast-moving door from banging on my door?

    To respond

  52. Jeff Patterson says:

    January 10, 2018 at 5:24 am

    Thanks Kim, have you tried this method on this door?

    To respond

  53. –davidinark says:

    February 13, 2018 at 2:45 p.m.

    I just found this and was about to try it on an office door. But, when I look at the hinge, it has a hex head in the center. Turns out our door can be adjusted to stop spinning just by tightening the hex screw! However, I would not have found this without your tip. Thank you!

    To respond

  54. Jeff Patterson says:

    February 16, 2018 at 5:30 a.m.

    David is awesome, thanks man for sharing. These hinges should be on every door!!

    To respond

  55. Inpong says:

    February 20, 2018 at 12:14 p.m.

    Thank you very much, great job as you mentioned. I put the pin in the center of the pin with a hammer which put the pin back in action keeping the bathroom door open. Thanks again.

    To respond

  56. Chris Duke says:

    February 24, 2018 at 5:00 p.m.

    Brilliant!! A quick Google search brought me here, and I’ve been swearing at our bathroom door for years. Thank you

    To respond

  57. Mary McDermott says:

    March 5, 2018 at 9:40 p.m.

    We had 3 doors facing this problem in our current house until I found your great solution. In less than 10 minutes, my husband was done. We have a new location in the country

  58. Jeff Patterson says:

    March 6, 2018 at 4:40 a.m.

    Thank you Mary for sharing your success, it’s amazing!

    To respond

  59. David said:

    March 12, 2018 at 3:09 p.m.

    I removed the middle hinge pin. I tried to bend it with a hammer, but the pin I have must be solid metal and it won’t bend no matter how many times I hit it with a metal hammer. I don’t know what to do now.

    To respond

  60. Rob says:

    March 28, 2018 at 11:35 a.m.

    Great easy solution. Thanks for taking the time to send this post!

    To respond

  61. dale list says:

    April 5, 2018 at 4:03 p.m.

    It worked!!!!!!!!!!! After years in that pesky door, thinking about all the toothpaste I would save LOL!!!! 🙂 took the 5 minutes, THANK YOU

    To respond

  62. Diana says:

    April 19, 2018 at 11:19 a.m.

    It’s a great solution. For me it wouldn’t work with the middle hinge, so I put the curved pin in the bottom hinge. Now let’s see how long my husband notices and whether to let him know or not.

    To respond

  63. Will said:

    April 27, 2018 at 9:15 p.m.

    My door opened and closed fine until I sprayed DW-40 to stop the squeaking. Thanks for the tip, I’ll try!

    To respond

  64. Renee Grob says:

    August 5, 2018 at 11:38 am

    It didn’t work for me! I bent the middle and bottom latches and the door still opens like magic. Should I bend the tip of the pin? I saw another blog saying don’t touch this blog.

    To respond

  65. Jeff Patterson says:

    August 11, 2018 at 5:52 am

    There is no harm in trying.

    To respond

  66. Andrei says:

    August 16, 2018 at 7:38 am

    I actually burst out laughing reading the first paragraph because I had the same problem. I have a small bathroom and the door gets in the way when I brush my teeth! I will try this today! Thanks for the helpful guide.

    To respond

  67. Dean Albright says:

    September 23, 2018 at 2:08 p.m.

    It works perfectly!! Thank you!

    To respond

  68. Baabee Kay says:

    September 27, 2018 at 11:31 a.m.

    Thank you for the written and video tutorials. They are usefully concise, well done. And thank you again.

    To respond

  69. Suzanne says:

    September 29, 2018 at 10:14 p.m.

    It took me longer to gather the supplies than to fix the door. Our guest bathroom door has been driving me crazy for partially closing it for eleven years. Thanks for the solution. It worked very well.

    To respond

  70. SHAWN KROSNICK says:

    September 30, 2018 at 12:50 p.m.

    It’s really super! Fixed in 5 minutes! Thanks very much.

    To respond

  71. Jeff Patterson says:

    October 7, 2018 at 7:02 am

    Candy! 1 Thank sergio

    To respond

  72. BK says:

    October 14, 2018 at 10:08 p.m.

    Hi Jeff, thanks! Works perfectly ! We had a bathroom door that wouldn’t open and it was driving my wife crazy!!! This solved the problem….BRILLIANT!!!!

    To respond

  73. Nacho Aguilar says:

    October 23, 2018 at 12:39 a.m.

    Thank you very much Jeff! Quick and easy fix!

    To respond

  74. Nancy says:

    October 25, 2018 at 1:53 p.m.

    Glad to hear that there is a solution to this annoying problem! I haven’t read all the comments, maybe my question is answered: If there are only two hinges, what is the deflection of the pin?

    To respond

  75. Nancy says:

    October 25, 2018 at 2:18 p.m.

    haha, can’t wait for an answer. I bent the bottom pin, and SUCCESS!! Thank you!

    To respond

  76. Suzanne Brownrigg says:

    December 30, 2018 at 4:13 p.m.

    Hi Jeff. It’s a shame that you only focus on the bathroom. I have problems all over my house.
    I tried this with three upstairs doors and they all work. A door still swings slightly, but only about 6 inches inward from the frame. I actually forged this pin again, but it still swings out of sight. The other two doors are good.
    Biggest problem, as a “middle aged” woman, lol, is finding a hammer heavy enough to bend pins. I had to bend my three pins a little more than your photos.
    But it worked and thank you very much!! I like being able to do simple projects without asking my husband for help. He didn’t know what I was doing and wondered if I was going to tear down the house.

    To respond

  77. James Hamm says:

    February 4, 2019 at 11:37 p.m.

    Name! Good repair!

    To respond

  78. Neill says:

    February 20, 2019 at 3:17 p.m.

    I’m a do-it-yourself type and was trying to find shims and all sorts of complicated methods before finally running into issues and figuring out how to fix them. I found this and thought, “There’s no way this will work” and it took 5 minutes and you know what? It totally works! Thank you for the simple and effective solution. The door doesn’t even feel like there’s any extra weight to open or close it. I’ve been blocking the door for two months haha. Thank you!

    To respond

  79. Catherine C Erickson says:

    February 21, 2019 at 1:51 p.m.

    Thanks very much! My laundry room door has been locked with me for 30 years…today I finally went looking for a solution…because my husband kept saying it couldn’t be fixed. I followed your instructions and voila! The door is still open! That’s wonderful ! No, that’s not really the case guys! Thank you Catherine Erickson

    To respond

  80. Pingback: Repair of pre-assembled interior doors (4 simple and easy methods)
  81. David Sebring says:

    May 25, 2019 at 4:42 p.m.

    So I followed your instructions exactly for the point and it didn’t work at all. Not even a little. So I was just wondering what baseball card you have? Thank you.

    To respond

  82. James Marquard says:

    June 1, 2019 at 10:58 p.m.

    Friction theory sounds good. However, I basically bent all 3 hinge pins to no avail. Since I don’t have a replacement, I don’t want to give up the theory. So I deformed the pins by grabbing them with a Vise-Grip. Perfect.

    To respond

  83. spicy calder says:

    June 23, 2019 at 10:52 a.m.

    This is not a proper solution, but what various industries call a “hack”. Yes, it’s quick and easy, but *doesn’t* solve the final problem – the door jam isn’t a plumb line. And the fix described in the article might only be temporary.
    Take a step and place it on the vertical edge of the door and open the door to a 90 degree angle? It’s not a plumb line? You may need to bring the door “almost closed” [and recheck the level] to see if it will slide.
    Typically, if the door closes on its own, you will need to redo the top hinges. If the door opens by itself, the bottom hinge will have to be redone.

    To respond

  84. Ralph says:

    July 18, 2019 at 11:59 am

    Jeff, thanks for that tip. Tomorrow I’ll hit the hinges with a hammer.

    To respond

  85. Delia M Rose says:

    July 22, 2019 at 1:54 p.m.

    What if there are 4 hinges?

    To respond

  86. nicole says:

    August 2, 2019 at 02:48

    Hi, we have this revolving door at work which closes instantly due to weight/gravity and injuries to staff. What can you suggest to fix this door for everyone’s safety? to thank!

    To respond

  87. Caryn N says:

    August 12, 2019 at 5:12 p.m.

    Surprising!! Three doors are driving me crazy!!
    Thank you!

    To respond

  88. Rock Silverman says:

    September 8, 2019 at 8:40 p.m.

    I typed in the search bar “fix the door that won’t open”, and voila! You had this really great idea to slightly bend the axis of the hinge of the door. I always smile from ear to ear and hop on one toe to solve such a simple problem. Thanks again.

    To respond

  89. Jeff Patterson says:

    September 10, 2019 at 8:38 p.m.

    Awesome Rock, thank you for entrusting us with your project. Feel free to share this trick with friends and give credit!!

    To respond

  90. Marv G says:

    November 14, 2019 at 2:19 p.m.

    Working like a charm… Wife is very happy now………….

    To respond

  91. film studio says:

    December 20, 2019 at 03:01

    How to remove the hinge pin if the top and bottom sides of the hinge are flat. Or are there other ways to fix a hinged swing door?

    To respond

  92. Pingback: How to fix your house door: Articles from DIYChatroom.com
  93. Adrian says:

    December 29, 2019 at 12:31 a.m.

    Unfortunately, this does not work on a newly replaced front exterior swing door. If a room is left open, it will expand

  94. Janusz says:

    January 25, 2020 at 2:50 p.m.

    Hinges purchased from DIY stores have a latch with caps on both ends, so you cannot remove the latch.
    Solution. If the door opens, remove the lower hinge and replace it with a smaller hinge. It worked for me.

    To respond

  95. Charlie says:

    February 26, 2020 at 8:55 p.m.

    Is there a problem removing the latch (if needed) after folding it?

    To respond

  96. Todd says:

    February 27, 2020 at 10:21 p.m.

    I can; I imagine there would be, but in the worst case you can easily cut it off and drop in a new one.

    To respond

  97. Karen Fowler says:

    June 6, 2020 at 3:32 p.m.

    Great information!!! We moved into a house where the bedroom door wouldn’t open. Thanks for the advice! No more plastic wedges under the door!

    To respond

  98. Call says:

    June 7, 2020 at 9:59 p.m.

    The knocker has dents on all the doors, I really appreciate that info. We lived in this house with swinging bathroom doors for 19 years. The work takes place in 10 minutes.
    PS If you can’t lower the latch yourself, call your 90 pound wife who will be happy to do it in one fell swoop.

    To respond

  99. mrenda says:

    July 22, 2020 at 7:45 p.m.

    I sprayed the pantry door wd40 now to close it, I have to use my hand to close it completely Otherwise it opens completely. What can I do?

    To respond

  100. Missy says:

    September 25, 2020 at 8:41 a.m.

    My door has no problem, accepts the squeak when opening and closing. So naturally, I used WD-40. Now my door won’t open. Hope this works!

    To respond

  101. Missy says:

    September 25, 2020 at 8:42 a.m.

    beep….typo 🙂

    To respond

  102. moira says:

    October 25, 2020 at 12:56 p.m.

    I DON’T GIVE ANY SHIT THIS EMPLOYEE IS A DUM AND IT DOESN’T WORK

    To respond

  103. Bubba the Redneck says:

    November 1, 2020 at 4:46 p.m.

    The bathroom door, which always closes tightly behind my back when I use the sink, is a major PITA. I have an injury (which will require surgery) that is making my arm bone very sore and frayed. The door slammed intermittently. I’m pretty sure I’ll have to remove the hinge, plug the screw holes and reassemble. I’m not good at these things.
    I followed your instructions to bend the hinge pin. It took 3 minutes to fix. It works like a charm. I owe you – a lot of time. It’s a bit “obvious” solution, but I would never have thought of it. TO THANK !!!

    To respond

  104. curt says:

    April 13, 2021 at 11:39 a.m.

    Hi Jeff, great article! Any tips for getting the opposite result? I have a bathroom door at work that I want to close myself. People always use it and leave it open and my office is right next to it and I have to go there and close it after they leave haha! Thank you!

    To respond

  105. Keneye Horak says:

    April 13, 2021 at 12:30 p.m.

    This trick worked exactly as described and took me 3 minutes. Thank you!

    To respond

  106. Makala says:

    April 22, 2021 at 1:59 p.m.

    Will this prevent a door from closing? We have a kitchen door that works fine when closed but now the latch won’t open all the way no matter how much we turn the doorknob and we end up closing the door but even if the door opens and does not close 8 times in 10 normal days. Any solution?

    To respond

  107. Jeff Patterson says:

    April 22, 2021 at 3:24 p.m.

    Hey Makala, looks like you need to adjust your hinge so the door lever lines up with the railing. I recommend checking the hinges and tightening the screws. It’s a good first step. You can then replace your hinge as a last resort.

    To respond

  108. Jason DePaul says:

    April 22, 2021 at 9:46 p.m.

    I just did a quick google search hoping to find someone exactly like you who knows how to handle a very dumb situation and make it easy to fix! My bathroom door hit my ass while I was in my closet on the other side for almost a year… No more, thank you! Genius!!! 👍👍👍😀😀😀🤗🤗🤗

    To respond

  109. bash says:

    June 16, 2021 at 1:44 a.m.

    Dear Jeff,
    Is it possible to make the door close by itself with the same kind of exercise

    To respond

  110. Dan says:

    August 7, 2021 at 12:10 p.m.

    Jeff, the bent pin on the center hinge works like a charm! It took a little “lighter” turn for my door, but worked after slamming harder on the latch. The doors are still open now! Thanks very much!!

    To respond

  111. Gabriel Castaneda says:

    August 12, 2021 at 3:43 p.m.

    Jeff, same for Dan’s comment. Thanks, from Loveland, Co.

    To respond

leave a replyCancel reply

Your email address will not be published. Mandatory fields are marked with *CommentName *
E-mail *
Website
Save my name, email and website in this browser for the next time I comment.

Repost

redirect message
Take a wet shower first and forget the shower Then easily fix a clogged floor

Popular questions about how to balance a door

how to balance a door?

Close and open the door several times. Continue adding wedges to either side as needed, or driving the jamb in the direction needed to level it. When the door closes properly and doesn’t swing open by itself, the door is balanced.

How do you fix an unbalanced door?

How do you fix a misaligned door?

Instructions
  1. Tighten Hinge Screws. …
  2. Replace Hinge Screws. …
  3. Drive Screw or Two Into Door Jamb. …
  4. Tighten Strike Plate. …
  5. Move Strike Plate Incrementally. …
  6. Move Strike Plate. …
  7. Inset Strike Plate Deeper Into Jamb. …
  8. Sand Down Door.

How do you balance a hinged door?

How do you realign a door?

How do you fix a misaligned double door?

How do you level an uneven door?

How do you Resquare a door?

Why won’t my door shut properly?

If the latch is too high or too low, try tightening your door’s hinges. If your door still won’t close after that, remove one of the screws on the jamb side of the hinge and drive in a 3-in. screw–it will help pull in the whole doorjamb.

How do you stop a door from swinging closed on its own?

Find the middle of the pin and tap it with your hammer until it has a slight bend. It only took three taps with my hammer. This bend will provide enough friction to stop the door from closing or opening by itself. Place the pin back into the hinge and tap it into place with your hammer.

How do you stop a door from ghosting?

How do you fix a door that rubs the floor?

If your door rubs near the top or drags on the floor, use a screwdriver, not a drill, to tighten the screws. With a drill, you’re more likely to over-tighten the screw and strip the screw holes or chew up the screwheads.

How do you adjust a double door?

How do you align a double entry door?

How do you shim a double door?

Video tutorials about how to balance a door

keywords: #torsion, #part, #parts, #spring, #springs, #door, #doors, #garage, #garages, #tutorial, #tutorials, #balance, #balancing, #repair, #repairs, #how, #how-to, #DDMGarageDoors, #garagedoors, #howdoes, #howto, #garagedoorsprings, #diy, #howto, #instructions

A garage door should stay down when closed, open when raised, and at the halfway point when raised halfway. You’ll find a helpful explanation on our blog at:

-https://ddmgaragedoors.com/blog/2015/11/03/a-balanced-garage-door/

These instructions should help. Remember to exercise caution because adjusting springs is dangerous.

Web Site –

-https://ddmgaragedoors.com

DIY Garage Door Instructions –

-https://ddmgaragedoors.com/diy-instructions/

Visit our most popular garage door springs page with videos at –

-https://ddmgaragedoors.com/diy-instructions/replace-garage-door-torsion-springs.php.

Garage Door Parts –

-https://ddmgaragedoors.com/parts/

Garage Door Springs –

-https://ddmgaragedoors.com/springs/garage-door-springs.php

Opener Parts –

-https://ddmgaragedoors.com/parts/garage-door-opener-parts.html

Dock Leveler Parts –

-https://ddmgaragedoors.com/dock-leveler-parts/

Find a Local Garage Door Repair Company –

-https://ddmgaragedoors.com/garage-door-repairs/

keywords: #HomeImprovement(Interest), #How-to(WebsiteCategory)

Learn how to balance a garage door in this video. Usually, after replacing a garage door spring, you will need to make sure the door is balanced again so it operates smoothly.

You can get garage door parts at:

-http://www.garagedoornation.com

keywords: #hinges, #adjustdoor, #doorhitting, #diy, #dominick

Other than a house settling there is a better way to adjust the door from hitting when you close it. Most of the time it’s because the hinges are worn.

-https://www.askmediy.com

keywords:

See more articles in category: FAQs