Best 8 how to repair toilet valve

Below is the best information and knowledge about how to repair toilet valve compiled and compiled by the lifefindall.com team, along with other related topics such as:: toilet float valve, replace toilet fill valve, toilet repair kit, toilet fill valve problems, toilet inlet valve, replacing toilet flush valve without removing tank, replace toilet fill valve seal, how to replace toilet fill valve and flapper.

how to repair toilet valve

Image for keyword: how to repair toilet valve

The most popular articles about how to repair toilet valve

How to Replace a Flush Valve | PlanItDIY

  • Author: www.planitdiy.com

  • Evaluate 3 ⭐ (5601 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Replace a Flush Valve | PlanItDIY Remove lid from tank. … Shut off water by turning the shut-off valve clockwise. … Drain as much water out of tank as possible by holding flush lever down until …

  • Match the search results: […] Replacing a toilet flush valve is a simple DIY that only takes a few minutes, even for a person with very basic technical skills. You’ll also receive an instruction manual and the required tools with your purchased valve to ease installation as well.  As long as you know the fitting …

  • Quote from the source:

Easy Fixes for Common Toilet Tank Parts – The Family …

  • Author: www.familyhandyman.com

  • Evaluate 4 ⭐ (22487 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Easy Fixes for Common Toilet Tank Parts – The Family … Inspect the washer for wear or cracks when you remove the cap to flush out the valve. Replace a worn, cracked valve washer by prying the old …

  • Match the search results: A toilet runs constantly because the fill valve that lets water into the toilet tank isn’t closing completely. A toilet runs intermittently because the flapper valve opens slightly for a few minutes. In either case, you have to figure out why that toilet fill valve isn’t stopping the inc…

  • Quote from the source:

Fluidmaster: How to Fix A Toilet | Toilet Tank Parts | How to …

  • Author: www.fluidmaster.com

  • Evaluate 4 ⭐ (23592 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Fluidmaster: How to Fix A Toilet | Toilet Tank Parts | How to … Your fill valve, flapper or flush valve could be the source. Take a look below for some common FLUSHING problems or view all problems: Fill Valve; Flapper …

  • Match the search results: If you are the site owner (or you manage this site), please whitelist your IP or if you think this block is an error please open a support ticket and make sure to include the block details (displayed in the box below), so we can assist you in troubleshooting the issue.

  • Quote from the source:

DIY Tip: How to Fix a Faulty Toilet Fill Valve – EnviroSafe

  • Author: www.envirosafeusa.com

  • Evaluate 4 ⭐ (23341 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about DIY Tip: How to Fix a Faulty Toilet Fill Valve – EnviroSafe Slide the rubber washer onto the threaded end of your new fill valve and then set it in place. Place the new nut on the threaded end beneath the …

  • Match the search results: The first step to replacing your fill valve is to shut off the water connection to your toilet. On the wall immediately behind your toilet should be a knob attached to a water line that sticks out from your wall. Twist this knob clockwise and you should shut the water connection off. Lift the lid of…

  • Quote from the source:

How to Repair Toilet Tank Components – This Old House

  • Author: www.thisoldhouse.com

  • Evaluate 3 ⭐ (2715 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Repair Toilet Tank Components – This Old House Every toilet tank has only a few components that can fail and cause the toilet to stop operating properly: the flush valve, and the fill valve.

  • Match the search results: Every toilet tank has only a few components that can fail and cause the toilet to stop operating properly: the flush valve, and the fill valve. If there’s a failure with the flush valve, it’s possible that the attached rubber flapper has worn off or isn’t sitting properly in the opening.

  • Quote from the source:

How to Replace a Toilet Shut-Off Valve – Bob Vila

  • Author: www.bobvila.com

  • Evaluate 3 ⭐ (19176 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Replace a Toilet Shut-Off Valve – Bob Vila How to Replace a Toilet Shut-Off Valve · STEP 1: Cut the water supply. · STEP 2: Drain the water lines. · STEP 3: Disconnect the supply line. · STEP …

  • Match the search results: Replacing a leaky toilet valve is a repair that most DIYers can complete in a few short hours. By following these simple steps, you can ensure that your toilet valve replacement will go smoothly, eliminating the offending leak and allowing you to get your toilet back into service.

  • Quote from the source:

How to Fix a Running Toilet: Flapper, Float, or Fill Valve – Insider

  • Author: www.insider.com

  • Evaluate 3 ⭐ (10628 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Fix a Running Toilet: Flapper, Float, or Fill Valve – Insider How to replace the fill valve · 1. Turn off the water supply. · 2. Flush the toilet. · 3. Disconnect the water supply from the tank. · 4. Remove the …

  • Match the search results: Duane Miller, owner of Stellar Plumbing, explains that there’s a simple way to test to see if your flapper is letting water leak through into the toilet bowl. You can put a few drops of food coloring into your toilet tank, then wait for 30 minutes. Don’t flush the toilet during that time. After 30 m…

  • Quote from the source:

How Much Does It Cost to Fix a Toilet Valve? – HomeServe

  • Author: www.homeserve.com

  • Evaluate 3 ⭐ (5481 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How Much Does It Cost to Fix a Toilet Valve? – HomeServe Replace flush valve: $75-$200 · Running toilet repair: $400 · Replacement toilet flush valve parts: $10-$30.

  • Match the search results:
    Reference #18.e7a19b8.1648887554.1bba24e6

  • Quote from the source:

Multi-read content how to repair toilet valve

If your toilet is leaking, the first suspect is usually the flush valve. Now, if you’re not sure what the problem is, you can watch our “Diagnosing a Leaking Toilet” video to find out which components inside the tank are leaking. If not, go ahead and I’ll show you how to install a new flush valve on your toilet.

The good news is that repairing a toilet is easy. It won’t cost you much and won’t take you much time. As usual, you’ll find all the parts and tools you need to complete this project, plus answers to your plumbing questions, right here at the hardware retailer.

The drain valve is located in the middle of the toilet. When you push the lever, the wiper mechanism lifts to let water flow out of the pitcher and into the bowl.

Some leaks can be fixed by replacing the cache. If that’s all you think you need to fix a leak, check out the FAQ section of our website for more information.

Here I will show you how to replace the exhaust valve assembly. This will include gaskets as well as seats that help create seals to keep water in the tank. To install it, you need to remove the toilet bowl from the bowl. Don’t worry, it’s easier than you think. So let’s get started.

First, open the tank cover.

Then shut off the water supply to the toilet by turning the shut-off valve clockwise.

Empty the water from the tank by pressing the tank lever. Use a sponge or towel to remove excess water. Now disconnect the water supply from the tank. You may need a crescent wrench or locking pliers to loosen the connection.

Disconnect the chain attached to the bridle. Also disconnect the intake manifold attached to the end of the overflow pipe.

Now we’re ready for the hardest part of the project: removing the tank from the bowl. Under the tank you will see bolts going through the tank and bowl flange. Take them out and be careful. If they are difficult to remove, use a penetrating oil to wash them. If you try to squeeze them, you can break the tank. To keep the bolt from moving while you loosen the nut, use a large screwdriver to hold the bolt head inside the tank.

Once the bolts are removed, lift the jar out of the bowl and place it on a towel on the floor so you don’t scratch it. Tanks can be heavy, so you may need help with this step.

You should see a large rubber gasket between the tank and the bowl. Remove this stamp and keep it. Some kits come with a replacement gasket and some don’t. So keep that in mind. They can also be purchased separately.

Tighten the large lock nut that secures the drain valve to the tank. Again, be careful how much force you use, as you don’t want to break the tank. Use a plumber’s wrench or a pair of heavy-duty locking pliers with adjustable jaws.

After removing the old relief valve, install the new valve in the same manner as the old valve. The rubber seals go inside the tank to prevent it from leaking. The lock nut fits on the outside. Tighten the jam nut by hand, then turn it half a turn with a plumber’s wrench. Don’t overtighten, or you risk cracking the tank.

Use the new brass tub bolts to secure the tub to the bowl. Hand tighten the nuts evenly and be sure not to overtighten or you risk cracking.

Connect the clapper chain to the starter lever, leaving some slack when closing the clapper. Then reconnect the water inlet hose to the overflow, turn on the water and your toilet will work like new.

If you have any questions about this or any other home improvement project, be sure to read our list of frequently asked questions for this video. And be sure to print out our project guide, including a tools and materials checklist, before heading to your local independent home improvement retailer. You will find all the products and useful advice to carry out your project. If you’re not sure where to find your local store, check out our store locator.

Good luck with your project and thanks for watching.

Close record

Popular questions about how to repair toilet valve

Can a toilet fill valve be repaired?

Fixing a toilet fill valve (once referred to as a ballcock) is relatively easy to repair if you happen to have a common Fluidmaster brand valve. Often, repairing a fill valve is done by simply replacing the entire fill valve, but Fluidmaster fill valves can be repaired by just replacing a seal inside the unit.

How do you fix a toilet water valve?

How do you fix a toilet valve that won’t shut off?

Here’s how you can:
  1. Step 1: Close the Main Water Supply. …
  2. Step 2: Remove Excess Water From the Pipes. …
  3. Step 3: Close the Toilet Supply Line. …
  4. Step 4: Remove the Existing Shut-Off Valve. …
  5. Step 5: Install a New Valve. …
  6. Step 6: Bring Back the Toilet Supply Line. …
  7. Step 7: Open the Main Water Supply.

What causes a fill valve to stop working?

How much does a toilet fill valve cost?

How Much Does It Cost to Replace a Toilet Fill Valve? It typically costs between $10 and $30 for a replacement toilet flush valve or other similar parts.

Why is my toilet shut off valve leaking?

The plumbing supply shutoff valves behind toilets or under sinks can go for years without being turned off and then reopened again. That inactivity can cause the neoprene washers to become either brittle or crusted up with mineral deposits, and they lose their ability to seal leaks.

How do you replace a shut off valve?

How do you replace a toilet inlet valve?

How do I know if my fill valve is broken?

You can spot a faulty fill valve by listening closely to strange sounds that might be coming from your toilet. The sound of water constantly running through the tank can indicate fill valve problems. Place a few drops of food coloring into the tank and watch to see if the colored water leaks out into the bowl.

How long should a toilet fill valve last?

about five years
Toilet fill valves last about five years, sometimes longer, depending on the quality of the valve, how often the toilet is flushed, and the quality of a home’s water supply. Like any valve constantly exposed to water, eventually a fill valve can clog or leak.

Do I need to replace toilet valve?

If the water doesn’t shut off or you hear muted screams or other protestations, it’s time to replace the valve. In addition, you should replace it if you can’t find the right float and valve adjustments to make the water stay off.

Are toilet fill valves all the same size?

Toilet flush valves come in different sizes ranging from 2 to 4 inches, depending on the toilet design. If you are thinking of buying a new toilet, pay attention to the type of flush valve it has. In most cases, larger valves move water faster, resulting in a better flush.

Should you caulk around toilet base?

1. Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.

How do you stop a leaking valve?

How do you fix a leaking stop and waste valve?

Video tutorials about how to repair toilet valve

keywords: #Repair, #Fill, #Valve, #leaking, #replacement, #water, #flush, #tank, #supply, #valve

-http://www.homeownerseries.com

Fill Valve Repair =

-http://youtu.be/IB0VHdhUR1s?hd=1

Fill Valve Part Overview =

-http://youtu.be/bNQFOwuUCKg?hd=1

To view the Fill Valve Replacement Playlist =

-http://www.youtube.com/view_play_list?p=4A143A19D85596B2

Replacing the Fill Valve

Diagnostic

The Toilet Fill Valve controls the amount of water in the tank of the toilet. This assembly should be replaced if it begins to not shut off correctly, becomes damaged, or corroded. To minimize any disruptions in service, it is suggested that the Fill Valve be replaced every five years as part of regular toilet maintenance.

Parts

A new fill valve assembly can be purchased at hardware or plumbing supply stores. The package should include the Fill valve assembly, refill tube, lock nut and any gaskets.

Tools

The tools needed to replace the Fill Valve are a pair of rib joint pliers, an adjustable open-end wrench, and a small plastic bin.

Replacement

Begin the replacement of the toilet fill valve by removing the tank’s lid, turning off the water supply valve, and flushing the toilet.

If the toilet already has an existing Fill Valve, and the base is in good condition, then the fill valve may be quickly replaced by reaching to the base of the fill valve and pulling up the lock ring, removing the refill tub, and sliding the Fill Valve off of its base. The new Fill Valve is installed by simply removing the base that came with it and sliding it onto the existing base in the toilet. Reach behind the Fill Valve and snap the lock ring down into place. Then attach the refill tube to the overflow tube and adjust the new fill valve for optimal water level.

If the Fill Valve base in the toilet is not in good condition, then the entire unit will need to be replaced as follows.

With the tank empty, position a plastic bin to collect water under the water supply hose and unscrew the hose from the base of the tank, having any water drain into the plastic bin below. Now with an adjustable open-end wrench, or rib joint pliers, unscrew the lock nut located on the shank of the fill valve. With the nut removed the entire assembly can be pulled out of the tank. The old assembly should be placed into the plastic bin as it may continue to drain water.

With the old assembly removed, take the new unit and adjust the height to best suit the height of the tank and overflow tube, usually around 1-inch below the tank’s edge. Insert the threaded end into the hole where the previous assembly was removed. Position the new assembly and thread the lock nut by hand securing the tube upright.

Once hand tight, secure the nut a quarter turn further with the rib joint pliers to insure a watertight seal. Now re-attach the water supply hose to the fill valve’s shank. Place the fill valve’s refill hose into the overflow tube. The refill hose must not extend below the tank’s water line or water will constantly siphon from the tank.

Most fill valve kits should include a metal clip or angle adaptor that, when installed, will prevent the refill tube from going below the water line. Once in place, turn on the water-supply valve and the tank will begin to fill. Make any adjustments to the water level by sliding the adjustment clip, located on the fill valve, to change the height of the float-cup. The tank’s water level is best at about 1-inch below the top of the overflow tube located in the center of the toilet. Inspect the new connections to make sure that they are not leaking water, and flush the toilet to test the toilet’s function. Once in order, replace the tank’s lid to complete the project.

keywords: #Repair, #Fill, #Valve, #leaking, #replacement, #water, #flush, #tank, #supply, #valve

-http://www.homeownerseries.com

Fill Valve Repair =

-http://youtu.be/IB0VHdhUR1s?hd=1

Fill Valve Part Overview =

-http://youtu.be/bNQFOwuUCKg?hd=1

To view the Fill Valve Replacement Playlist =

-http://www.youtube.com/view_play_list?p=4A143A19D85596B2

Replacing the Fill Valve

Diagnostic

The Toilet Fill Valve controls the amount of water in the tank of the toilet. This assembly should be replaced if it begins to not shut off correctly, becomes damaged, or corroded. To minimize any disruptions in service, it is suggested that the Fill Valve be replaced every five years as part of regular toilet maintenance.

Parts

A new fill valve assembly can be purchased at hardware or plumbing supply stores. The package should include the Fill valve assembly, refill tube, lock nut and any gaskets.

Tools

The tools needed to replace the Fill Valve are a pair of rib joint pliers, an adjustable open-end wrench, and a small plastic bin.

Replacement

Begin the replacement of the toilet fill valve by removing the tank’s lid, turning off the water supply valve, and flushing the toilet.

If the toilet already has an existing Fill Valve, and the base is in good condition, then the fill valve may be quickly replaced by reaching to the base of the fill valve and pulling up the lock ring, removing the refill tub, and sliding the Fill Valve off of its base. The new Fill Valve is installed by simply removing the base that came with it and sliding it onto the existing base in the toilet. Reach behind the Fill Valve and snap the lock ring down into place. Then attach the refill tube to the overflow tube and adjust the new fill valve for optimal water level.

If the Fill Valve base in the toilet is not in good condition, then the entire unit will need to be replaced as follows.

With the tank empty, position a plastic bin to collect water under the water supply hose and unscrew the hose from the base of the tank, having any water drain into the plastic bin below. Now with an adjustable open-end wrench, or rib joint pliers, unscrew the lock nut located on the shank of the fill valve. With the nut removed the entire assembly can be pulled out of the tank. The old assembly should be placed into the plastic bin as it may continue to drain water.

With the old assembly removed, take the new unit and adjust the height to best suit the height of the tank and overflow tube, usually around 1-inch below the tank’s edge. Insert the threaded end into the hole where the previous assembly was removed. Position the new assembly and thread the lock nut by hand securing the tube upright.

Once hand tight, secure the nut a quarter turn further with the rib joint pliers to insure a watertight seal. Now re-attach the water supply hose to the fill valve’s shank. Place the fill valve’s refill hose into the overflow tube. The refill hose must not extend below the tank’s water line or water will constantly siphon from the tank.

Most fill valve kits should include a metal clip or angle adaptor that, when installed, will prevent the refill tube from going below the water line. Once in place, turn on the water-supply valve and the tank will begin to fill. Make any adjustments to the water level by sliding the adjustment clip, located on the fill valve, to change the height of the float-cup. The tank’s water level is best at about 1-inch below the top of the overflow tube located in the center of the toilet. Inspect the new connections to make sure that they are not leaking water, and flush the toilet to test the toilet’s function. Once in order, replace the tank’s lid to complete the project.

keywords: #homedepot, #homeimprovement, #diy, #toiletrepair, #toiletfillvalve, #replacetoiletfillvalve, #toiletrunningconstantly, #toiletfillvalvereplacement, #toiletfillvalvetypes

It’s helpful to know how to replace a toilet fill valve. If your toilet tank is running and a new flapper doesn’t do the trick, it could be time to swap out the toilet fill valve. Learn to fix a fill valve leak by yourself. Find out more with our Toilet Repair playlist:

-https://thd.co/3aJq3p2

Check out our How to Replace a Fill Valve guide:

-https://thd.co/34BBjBo

Follow these steps to DIY replace a toilet fill valve:

0:09 Tools \u0026 Materials

0:15 Step 1: Empty tank

0:31 Step 2: Remove old fill valve

0:39 Step 3: Prepare new fill valve

0:48 Step 4: Insert new fill valve

0:55 Step 5: Attach refill tube

1:03 Step 6: Turn on water supply

#TheHomeDepot #HomeImprovement #ToiletRepair

SUBSCRIBE to The Home Depot:

-http://thd.co/2iib0HE

About The Home Depot:

How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.

WEBSITE:

-https://thd.co/TheHomeDepotSite

FACEBOOK:

-https://thd.co/TheHomeDepotFacebook

TWITTER:

-https://thd.co/TheHomeDepotTwitter

INSTAGRAM:

-https://thd.co/TheHomeDepotIG

PINTEREST:

-https://thd.co/TheHomeDepotPinterest

How to Replace a Toilet Fill Valve | Toilet Repair | The Home Depot

-https://www.youtube.com/watch?v=H5G4OeIDXMk

keywords: #Repair, #Flush, #Valve, #leaking, #water, #dripping, #flapper, #lever, #replace

-http://www.homeownerseries.com

This is video #1 of a 3-part series. The videos are:

Part 1 =

-http://youtu.be/8xlJXrSK3ag?hd=1

Part 2 =

-http://youtu.be/BLDvTRZlyCo?hd=1

Part Overview =

-http://youtu.be/KCPlbiTcLc4?hd=1

To watch the Flush Valve Playlist =

-http://www.youtube.com/view_play_list?p=31C570921B83280C

Flush Valve

Diagnostic

The toilet’s flush valve assembly is most often the center of any leaking in the toilet’s tank. It has moving parts that seal and drain, so as such is prone to be highly affected by corrosion or deterioration. The flush valve assembly consists of the Overflow Tube, Seat, Flapper Valve, and the Sponge Gasket. Each of these parts will develop problems over time, causing an internal leak that is hard to trace. Whenever the flush valve is going to be replaced, the sponge gasket and tank mounting bolts should also be replaced at that time.

To replace the flush valve the entire tank will have to be removed from the bowl of the toilet, exposing the sponge gasket and the nut holding the valve in place. It may be difficult to identify which of these parts are malfunctioning because any defect may be too small to see, for this very reason, whenever the flush valve, sponge gasket, or tank mounting bolts are worn-out, all of these items should be replaced at the same time.

See more articles in category: FAQs