Best 15 how to get a mirror finish on wood

Below is the best information and knowledge about how to get a mirror finish on wood compiled and compiled by the lifefindall.com team, along with other related topics such as:: how to get a mirror finish on painted wood, how to get a piano finish on wood, how to get high gloss finish on painted wood, how to get a mirror finish with gloss paint, how to get a glass like finish on wood, how to make wood shiny diy, how to make painted wood smooth and shiny, how to get a smooth lacquer finish.

how to get a mirror finish on wood

Image for keyword: how to get a mirror finish on wood

The most popular articles about how to get a mirror finish on wood

Rubbing Out A High-Gloss Finish | Woodsmith

  • Author: www.woodsmith.com

  • Evaluate 4 ⭐ (34862 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Rubbing Out A High-Gloss Finish | Woodsmith Getting a professional-quality, mirror finish is just a matter of using the right fi nishing products, techniques, and a little elbow grease …

  • Match the search results: But getting a high-gloss finish presents a special challenge. The problem is achieving the “smooth-as-glass” surface. Straight from the can, glossy finishes are very reflective. But they often impart a “plastic” look to the surface. For the most part, that look is the result of the layers of finish …

  • Quote from the source:

How to Get a High Gloss Finish On Wood (The Easy Way)

  • Author: sensibledigs.com

  • Evaluate 3 ⭐ (2368 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Get a High Gloss Finish On Wood (The Easy Way) There are several ways to achieve a high gloss finish on your wooden furniture. Polyurethane is one way to make your wood shine. Another method …

  • Match the search results: A high gloss finish is when the surface of your wood reflects light, with a sheen that looks like glass. The pinnacle of high gloss finishing is French polishing, which involves applying many layers of shellac dissolved in alcohol.

  • Quote from the source:

Get a Glass Like Finish on Wood: 7 Steps to Make Shiny …

  • Author: solvesonic.com

  • Evaluate 3 ⭐ (13765 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Get a Glass Like Finish on Wood: 7 Steps to Make Shiny … apply clear coat polyurethane on wood surface Minwax Fast-Drying Polyurethane Clear Finish=>Check on Amazon ; Minwax Water Based Oil Modified …

  • Match the search results: There are lots of ways you can get a glass-like finish on your wood surface. Most of the time, a layer (or several layers) of the polyurethane causes the shiniest and glass-like appearance on the wood finish.

  • Quote from the source:

High Gloss in Minutes – FineWoodworking

  • Author: www.finewoodworking.com

  • Evaluate 4 ⭐ (37663 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about High Gloss in Minutes – FineWoodworking Getting high-gloss rubbed-out finish is one of the more challenging … since it brings out the color and figure of the wood like no other.

  • Match the search results: Getting high-gloss rubbed-out finish is one of the more challenging feats of woodworking. But the finish is hard to beat since it brings out the color and figure of the wood like no other.

  • Quote from the source:

High Gloss Finish on Wood Furniture – [Explained] – Only …

  • Author: onlyinteriordesign.com

  • Evaluate 3 ⭐ (6659 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about High Gloss Finish on Wood Furniture – [Explained] – Only … High gloss finish on wood furniture refers to very shiny smooth layer of polish on furniture surface. You can get high gloss finish wood …

  • Match the search results: High gloss finish on wood furniture refers to very shiny smooth layer of polish on furniture surface. You can get high gloss finish wood furniture from the market, or you can do it yourself. High gloss finish on wood furniture is also called mirror finish on wood furniture, as it reflects smooth an …

  • Quote from the source:

Building High Gloss Finish from the Ground Up – Rockler

  • Author: www.rockler.com

  • Evaluate 3 ⭐ (17076 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Building High Gloss Finish from the Ground Up – Rockler Michael Dresdner explains the best finishes to use to achieve a … Thus, a clear gloss finish should be transparent enough to see the wood …

  • Match the search results: Build the entire finish in gloss. Yes, you can flatten a satin or matte finish smooth enough to reflect light, but thanks to the flatting agent in it, the finish will look hazy. Start with smooth, flat wood, and keep each layer as flat and smooth as possible.

  • Quote from the source:

How To Get A High Gloss Paint Finish On Wood

  • Author: cutthewood.com

  • Evaluate 3 ⭐ (14736 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Get A High Gloss Paint Finish On Wood Instructions · 1) Sand, fill, and prime · 2) Put on a flat paint · 3) Sanding it lightly · 4) Seal it · 5) Make it glossy.

  • Match the search results: Flat paint is the one that will provide that maximum adhesion for your high gloss finish later on. Use a mini foam roller and a light touch. Apply multiple thin coats on the surface.

  • Quote from the source:

Is it possible to polish a piece of wood so much that you can …

  • Author: www.quora.com

  • Evaluate 4 ⭐ (22047 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Is it possible to polish a piece of wood so much that you can … 6 câu trả lời

  • Match the search results: Something went wrong. Wait a moment and try again.

  • Quote from the source:

How do you paint wood to a mirror finish? – AskingLot.com

  • Author: askinglot.com

  • Evaluate 4 ⭐ (24343 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How do you paint wood to a mirror finish? – AskingLot.com Place the wood onto a drop cloth to collect any debris from the finishing process. · Sand away any scratches on the wood with a medium-grit …

  • Match the search results: Note: This painting project works best on wood, metal, and laminate frames. Also, using spray paint will ensure that your finish is as smooth as possible. Using an acrylic paint that is brushed on will leave brush marks on the surface no matter how careful you are.

  • Quote from the source:

How to Get A Glass Like Finish on Wood: 5 Easy Steps!

  • Author: homearise.com

  • Evaluate 3 ⭐ (16304 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Get A Glass Like Finish on Wood: 5 Easy Steps! The biggest challenge while working with wood finishes is getting a mirror finish on them. It might seem arduous because woodworking …

  • Match the search results: The biggest challenge while working with wood finishes is getting a mirror finish on them. It might seem arduous because woodworking involves different instruments and a dusty atmosphere. We understand if the same issue is bothering you.

  • Quote from the source:

How To Get A Perfect Gloss Paint Finish On Furniture!

  • Author: www.paintedbykaylapayne.com

  • Evaluate 3 ⭐ (19407 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Get A Perfect Gloss Paint Finish On Furniture! I think we can all agree that achieving a perfectly flat, high gloss, reflective, mirror-like painted surface is one of the most challenging …

  • Match the search results: I use to buff cars in my early 20s, I got the bug, got really good at it.. I could wet sand a car’s hood to the point of mirror finish. Water would run off it because there was no micro hills and valleys to stop it’s decent. Became a cabinetmaker only to see wood finishes as an incredibl…

  • Quote from the source:

How to Get a Glass Finish on Wood – HomeSteady

  • Author: homesteady.com

  • Evaluate 3 ⭐ (17749 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Get a Glass Finish on Wood – HomeSteady Apply a small pool of rubbing compound to the center of a microfiber cloth and then rub the compound into the surface of the wood. Use small …

  • Match the search results: Creating a glass finish on wood takes time and effort, however, since the finish needs building slowly through a series of abrasives that smooth out the finish coat to a bright glossy shine. The results of the work are worth the effort when light reflects off a brilliant finish with the smoothness a…

  • Quote from the source:

How can I achieve a high-gloss finish on wood furniture?

  • Author: www.houzz.com

  • Evaluate 3 ⭐ (17573 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How can I achieve a high-gloss finish on wood furniture? I have a pair of old ottomans that I’m having reupholstered and I’d like to refinish the brown wood legs to achieve a grey high-gloss or lacquer look.

  • Match the search results: I use Amy Howard spray lacquer… amazing stuff… she has directions on her site and tons of colors http://www.amyhowardhome.com/furniture-lacquer/

  • Quote from the source:

Trying to get a mirror finish with shellac – Lumberjocks

  • Author: www.lumberjocks.com

  • Evaluate 4 ⭐ (22039 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Trying to get a mirror finish with shellac – Lumberjocks I believe the scratches are appearing between sanding/polishing of the finish. The wood underneath is not perfectly flat and blemish free. I …

  • Match the search results: That said, you can french polish over any shellacked surfaceand the alcohol will “melt” the layers together. It’s thepressure of the “rubber” (fr. “tampon”) than compressesthe finish and makes it smooth and lustrous. As morecoats build, friction happens a…

  • Quote from the source:

POLYURETHANE FINISH: Power Buffing for Flawlessly, Glass …

  • Author: baileylineroad.com

  • Evaluate 4 ⭐ (20934 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about POLYURETHANE FINISH: Power Buffing for Flawlessly, Glass … Want a glass-smooth wood finish? … Buffing really does make it easy to get superb results on wood finished with polyurethane, …

  • Match the search results: Now comes the fun. It’s time to power buff. Grab your random orbit sander and a piece of superfine 3M rubbing pad. This is a thick, non-woven, synthetic abrasive material available at woodworking outlets and better hardware stores. It comes in different abrasive ratings, and the superfine type is wh…

  • Quote from the source:

Multi-read content how to get a mirror finish on wood

how to get a mirror finish on wood

Wood is an excellent medium for any crafter, advanced or beginner.

Suitable for a variety of projects such as carving, building, painting or even wood burning, wood is a durable and forgiving canvas that allows you to easily discover, make mistakes and fix them throughout your life. your project.

Once you’ve completed the final stages of your painting or staining, you’ll want to put a finish on your wood project to seal and protect your construction.

However, the correct finish will depend on the project and the type of wood (such as oak, MDF, mahogany, walnut, fir, etc.)

So you’ll want to familiarize yourself with the many finishes to choose the one that’s right for you.

Different types of wood finishes

Wood finishes come in different varieties.

Shellac, lacquer, varnish, satin – each offers different benefits and looks that can make or break your work.

A very versatile finish that we recommend to many woodworkers is gloss or mirror.

Clear and protective,shiny mirror finishSeal any project and leave it with a beautiful glossy finish that is sure to dazzle you.

Even if your old wooden furniture is starting to look pale and dull, you can restore its beauty and shine by achieving a high gloss finish.

how to make wood glossy and smooth

How to get a mirror finish on wood?

Before planning to apply a high gloss mirror finish to wooden furniture, let me tell you that the gloss can be tricky to apply properly.

So I’ve put together a detailed step-by-step guide here on how to properly apply and contribute to your efforts!

By following this process you will hopefully get the glossy mirror finish you want on your woodwork.

Step 1: Prepare the wood

Every good artist starts with a blank canvas.

However, woodworking does not start with just any type of wood.

You need to prep your project to ensure the shine continues to be perfect, making sure your wood will be fully coated to achieve that glossy finish.

To clean

Start by wiping off any dirt, scratches or dust with a damp cloth.

Use a mild soap (like dish detergent) for particularly tough spots, but try to limit use to very small spots if possible.

It is very important to keep each area perfectly clean, as even the slightest dust or debris can dull the finish.

Wipe thoroughly, then use a dry towel to dry and remove moisture.

Sand

Once the wood is completely dry, it’s time to sand.

You should sand wherever you plan to apply the varnish.

If only certain parts of the project require gloss, you canusing painter’s tapeto seal dry areas.

You should also use masking tape on your work surface to keep the polish from spilling or running.

Try applying several layers of tape on top of each other to keep the gloss from seeping through the seams, and use a small rag if necessary to prevent the sealant from sticking to your house.

Choose the right paper and the right type of paper for your project.

Finished wood will need a medium grit paper, but unpainted or unpainted wood should have a finer, smoother finish.

Use a steady back and forth motion until you’re touching the bare wood, then use finer sandpaper until it touches the project.

Sand gently and in the direction of the grain (wood flow).

Once you have smoothed the wood, wipe down all surfaces of the wood with a clean rag and remove all sawdust.

Fill with pearls

Once you’ve sanded the surface well, it’s time to fill in the grains using a high quality oil or water based wood grain filler.

Remember, this is an important step to achieving a mirror finish on woods like open grain oak.

When applyingcereal filler, you can paint with a brush.

Then scrape the surface flat with a plastic paint scraper.

Finally, let the surface dry for a few hours and sand it lightly in the direction of the grain.

high gloss wood finish

Step 2: Apply Primer

Before you start, make sure you’re using the highest quality brush you can get your hands on.

The more effective the brush, the better the stain and shine of the surface.

Be sure to choose the right brush based on the material that makes up the stain.

This means synthetic brushes for polyurethane stains and natural bristle brushes for oil-based stains.

Based

Now that your furniture is ready, the next step is to create a base for the gloss paint to adhere to.

Having a smooth base coat is key to ensuring an even coat of paint, which really helps achieve the glossy finish you’re looking for.

Most varnishes are self-sealing, but some require an undercoatwood stainbefore the tip is sealed.

If your varnish requires wood stains, apply an even coat to your project as an initial base coat.

Use even, overlapping strokes and be sure to avoid spots that form a puddle or more.

fine shade

If your project requires an additional sealer, use a diluted oil-based varnish as a primer before moving on to a gloss.

Again, use a brush to evenly apply layers using overlapping strokes and avoid larger amounts of product.

Once you have completed all coats of primer, you are ready to begin pouring the topcoat.

Step 3: shine

Now that your primer is dry, you can start applying a gloss finish over the base coat.

Use a paintbrush to apply two coats of undiluted varnish to the wooden surface.

Wait 24 hours between coats to ensure coats are completely dry.

Some varnishes require light sanding between coats, so check the label carefully.

You can use a light razor to scrape off any bumps or unevenness to ensure your topcoat stays flat and even.

Keep applying coats until your finish is perfectly glossy.

Finally, when your entire build is dry, lightly sand all areas with wet sandpaper.

Don’t sweat your mistakes

When you appliedlacquer, varnish or other stain, any flaws you discover should be left as is.

Nobody’s perfect, so if you notice a small area that doesn’t look smooth, don’t try to do it after the stain has been applied.

This is because most stains are sticky, which means trying to correct a mistake could make the situation worse.

But if the location is really noticeable, there are a few things you can try.

Remove any objects that might be trapped in the stain.

This means any dirt, debris, hair, or living organisms such as flies.

If you notice any air bubbles, use a small pin to push them out to smooth the surface again.

getting a glossy finish on wood furniture

Step 4: Polishing and Finishing

Your job isn’t done when you finish sanding.

Wear and tear can still accumulate on projects, especially after years of admiration and exposure.

It is therefore important to maintain your project well.

Taking these final steps to ensure your work is properly maintained will ensure that your project remains in pristine condition for years to come.

Dry surface polishing

You can research your gloss tag to see what the best polishing method is.

Car polish is a good solution, but wax and even water can be good alternatives.

Keep buffing until you have buffed everything to a perfect polish.

Use wood conditioner oil

For some woods like cherry, maple, and birch, you need to use a wood conditioner.

The wood conditioner will help smooth out the stain after it’s applied.

This will help retain the mirror finish longer.

In fact, a wood conditioner can be used before staining to reduce light and dark marks and keep the surface even.

Finally dust off your project

It’s important to dust the finished wood to protect it from dust or other debris that can accumulate and dull the shine of your mirror’s finish.

Specially formulated wood products, such as oil soaps or other wood polishes, can also help protect the finish.

Avoid harsh cleaners or abrasives that can scratch or degrade the finish, and try to avoid water, which can cause the wood in your project to swell and crack the varnish.

And There you go!

Your new project will shimmer and shine beautifully with a mirror-gloss finish, and you’ll have a new hobby to practice and show off to friends and family.

Enjoy the stunning results of high gloss mirror finished furniture for years to come.

getting a glossy finish with spray paint

Can you get a mirror finish with the spray paint?

Yes, you can absolutely achieve a mirror finish with spray paint if you clean and smooth the surface the first time.

In fact, one of my guests recently told me how she achieved a shiny metallic finish on wood surfaces using a product called chrome finish spray paint.

If you want an extra shine, you can use a can of “listed gloss” spray paint by following these simple steps…

  • Apply spray enamel to your piece as a base primer
  • Apply at least two coats of high gloss spray paint of your choice
  • Let freshly painted furniture dry completely overnight
  • Now that the spray paint has dried, finally coat the project with clear finishing spray

Applying the final clear coat is essential to enhance the gloss and finish of your project.

Plus, it also provides an extra layer of protection against possible scratches, dirt, and grime.

best high gloss wood finish

What is the best stain to achieve a glossy mirror finish on wood?

Process and coating requirements may vary depending on the wood and gloss you purchase.

So, when buying varnishes for finishing wooden furniture, be sure to choose your gloss carefully.

IN MY HUMBLE OPINION,Glossy polyurethaneis the best choice for achieving a glossy mirror finish on wooden surfaces.

But different brands may have different types of polyurethane that vary in size and composition.

Therefore, it is important that you check the brand and type you choose.

Oil-based and water-based beads

Use oil-based polishes for durability and/or a water-based gloss, as these will provide the most mirror-like clarity and shine.

Water-based varnishes are completely transparent and are also less odorous and toxic, while oil-based varnishes are durable and heat-resistant, making them more suitable for kitchens or other hot areas. high temperature.

Semi-gloss and full gloss (check level of gloss)

When choosing a wood finish for a mirror finish, remember that a higher gloss rating means a shinier finish and a longer lasting sealer.

Semi-gloss paint works well in rooms that need a lot of cleaning, like a kitchen or bathroom, while full-gloss products give a building a shiny, wet look.

The semi-gloss paint is perfect for blocking out oil, dirt, or other debris, but it also highlights imperfections in the wood.

The high gloss creates a sheer, reflective mirror finish.

They’re great for cabinets or other cubicle doors, places that can really show off the wood and highlights.

Estimate how much shine you will need

Finally, when buying varnish for a gloss finish, use a paint calculator to estimate the gloss you’ll need for your project.

When deciding how many liters of gloss you need for your project, keep in mind that it is advisable to apply 2-3 thin coats rather than one thick coat, as thick coats will take longer to dry and can produce results. .

Also remember,varnish, lacquer and varnish can cover a lot more area than paint, so be sure to buy the right amount for your needs.

Key point

DIY is a new favorite pastime these days.

Crafting tutorials have taken over social media, dominating YouTube, Instagram, Facebook and other popular blogs.

Whether you’re a long-time artist or just starting out, working with your hands can be one of the most rewarding and enjoyable activities you can do.

Especially when painting your furniture with mirror polish.

Whether it’s teak, oak, cedar or MDF, choosing the right medium for your work can be a huge challenge, but the finished product will be worth it.

Remember to be careful when applying all stains and topcoats.

Wear appropriate masks and gloves, and wash your brushes thoroughly to save them later.

Share the article “How to get high gloss on a wooden mirror?”

Can Andersen® Fiberx windows be painted?

Andersen® Windows has been in the window industry for decades. Originally founded in 1903 by Hans Andersen andRead more

Should the hardboard surface be painted?

Just as Kleenex or Xerox have become synonymous with fabric and replication, Hardie board has also become synonymous withRead more

How to paint over an old rusty metal roof?

Metal roofs are usually made of galvanized steel, copper or aluminum. Most of them are quite strong and have high resistanceRead more

How to paint a basement ceiling with a clothesline

A basement with an exposed unfinished ceiling can be a challenge to paint. With insulation, wires, pipes,Read more

Jack Luis is a retired artist who enjoys painting his clients’ ideas on their walls.

He worked as a painter for over a decade serving clients in areas such as Charleston, Mount Pleasant, Beaufort, Georgetown, SC (South Carolina). Today, in his spare time, he enjoys reading and writing about new techniques implemented in his profession. You can find out more about himthisor contact thethis.

In case you want to hire professional painters in your area, you canClick here. We can instantly send you free quotes from trusted illustrators based on your specific needs.

Content of the page (quick summary)

Different types of wood finishes How to get a mirror finish on wood? Step 1: Prepare the wood Step 2: Primer Step 3: Gloss Step 4: Polish and finish Shiny mirror finish on the wood?

Popular questions about how to get a mirror finish on wood

how to get a mirror finish on wood?

How to Get a Mirror Finish on WoodSand the bare wood as needed to smooth it and remove the old finish. … Fill the grain with an oil-or water-based wood grain filler. … Spray one coat of lacquer. … Apply one more coat of varnish.

How do I get a high gloss finish on wood?

Start buffing with coarse red rubbing compound, then finer white polishing compound. Before switching grits, clean all rubbing compound from the wood surface and the buff head. Give the finish plenty of time to dry. The drier it is, the faster and easier it is to buff to gloss.

How do you get gloss look on wood?

What to put on wood to make it glossy?

When you see shiny wood, it’s likely that the wood’s shine is caused by a coat of polyurethane on it. You can take virtually any piece of wood and add a DIY shiny wood finish using polyurethane. The process is not difficult but it is time consuming and takes a lot of hard work to get a smooth, flat, shiny finish.

How do you make wood shine like glass?

Apply a small pool of rubbing compound to the center of a microfiber cloth and then rub the compound into the surface of the wood. Use small circles to apply the compound, rubbing until it dries and then rubbing it off the piece. The compound will create the glasslike finish on your clearcoat.

How do you mirror finish with gloss paint?

How do you make wood look old with Vaseline?

How do you make wood look old with vinegar?

Iron vinegar on cedar – cheap, easy and fast!
  1. Soak some steel wool in white vinegar for a few hours or a few days – the longer it steeps, the darker the aged effect will be. …
  2. Use 0000 steel wool (shown here) so it breaks down even faster in the vinegar.

How do I make wood look weathered GREY?

Achieving an ashen-gray look (similar to driftwood) is as easy as applying a special DIY wood stain. Tear up one #0000-grade steel wool pad and stick it in a mason jar, along with 1-1/2 cups white vinegar. Screw on the lid. The rusting wool will change the tint of the vinegar, which you’ll then brush onto your wood.

How do you get super smooth finish on wood?

5 Tricks for a Silky-smooth Finish
  1. Vacuum. The best method of removing sanding dust is with a vacuum. …
  2. Strain. To ensure previously opened cans of finish are dust- and dirt-free, strain the finish before using. …
  3. Wipe. …
  4. Sand. …
  5. Paper bag.

How do I get a high gloss finish with varnish?

How do I get a mirror finish on oak?

The traditional way to get a mirror finish on wood is to use a technique called French polish, which basically consists of rubbing on layers of shellac. This technique is time-consuming, though, and because of the stickiness of shellac, it can be tricky.

How do you apply polyurethane to glass finish on wood?

How do you finish varnished wood?

Does mirror paint work on wood?

Can I Use Mirror Spray Paint On Wood? A lacquer with a shiny metal chrome effect, which is achieved by leafing extra metallic dust. Metal, wood, aluminium, glass, ceramics, stone, concrete, and some plastics are all suitable for this product.

Video tutorials about how to get a mirror finish on wood

keywords: #sprayfinishing, #woodfinishing, #spraying, #woodwork, #howto, #polishing, #mirrorfinish, #mirrorfinishwood, #polishingtool, #highglossfinish, #polyurethanewoodfinish, #highglossfinishing, #woodfinishingtechniques, #polyurethanefinish, #spraypainting, #highglossvarnish, #pianofinish, #superhighgloss

This is a tutorial on how to burnish lacquer and get a very shiny mirror finish. This is to go with a post I wrote on my web site

-http://elitefurniturerefinishing.com/

This video is in two parts as I can only upload 10 minutes at a time, thanks for watching please subscribe as I will be making more videos soon.

keywords: #AtlanticPlywood, #MLCampbell, #HighGloss, #StandardOperatingProcedure, #WoodFinishing, #Festool(BusinessOperation), #woodfinish, #superglaze, #howtofinishmdf, #polishinglacquer, #3m, #abrasives, #epoxy, #polarion, #deros, #ceros, #handsander, #orbitalsander, #polyurethane, #MLC, #sherwinwilliams, #SW, #milesi, #valspar, #highglosssurface, #lenmar, #highglosswood, #m.l.campbell, #sw, #sherwin

This video follows Mirka Abrasive’s SOP for High-Gloss Wood Finishing. Click here for the PDF version-

-https://www.atlanticplywood.com/wp-content/uploads/2019/08/HIgh-Gloss-SOP.pdf

*please note: products/sander have been updated since this video was originally posted. Please contact us with questions.

As always, your Atlantic Plywood Wood Coating Specialists are available to assist with all your finishing needs

-https://www.atlanticplywood.com/product-category/finishing/

keywords: #boardbuilding, #woodworking, #woodproject, #project, #cashedoutboards, #homemadeskateboard, #homemadelongboard, #homemade, #handmade, #handmadeskateboard, #handmadelongboard, #DIY, #Doityourself, #tutorial, #howto, #guide, #tips, #tricks, #finish, #clearcoat, #clearcoat, #polish, #shine, #mirrorfinish, #depth, #gloss, #highgloss

I show you my process for getting a mirror finish out of the clear coat on my longboards! This gives you a super glossy, almost liquid looking reflective shine. These techniques will work for most finishes on most woodworking projects. The board in the video is a completely homemade CashedOutBoards cruiser. Thanks for watching!

keywords: #polyurethanefinish, #woodfinishing, #stevemaxwell, #baileylineroad.com, #woodworking, #canada'shandiestman, #doityourself, #diy, #woodstain, #minwaxwaterbasedpolyurethane, #clearcoatforwood, #furniturefinishing, #typesofwoodfinishes, #whatispolyurethane, #minwaxstain, #tungoil, #minwaxpolyurethane, #howardrestorafinish, #woodfloorstain, #danishoil, #weatheredoakstain, #woodgrainpaint, #applyingpolyurethane, #exteriorwoodstain, #foodsafewoodfinish

Are you discouraged with the quality of finish you get on wood? Power buffing can fix that. Watch this simple technique in action and you won’t be disappointed any more. I discovered this method more than 20 years ago and it’s perfect for the home DIYer. Here’s a link to the place I buy my rubbing pads for this technique:

-https://bit.ly/2Xlernx

READ MY POPULAR ARTICLES ABOUT:

Polyurethane Finish –

-https://bit.ly/powerbuffing

DIY Hoop House Plans –

-https://bit.ly/hoophouseplans

Submersible Pump Installation –

-https://bit.ly/pumpinstallation

Air-Drying Wood Tips –

-https://bit.ly/wooddrying

How to Build a Table –

-https://bit.ly/tablebuilding

How to Stain a Deck –

-https://bit.ly/deckstain

Choosing Waterproof Outdoor Glue –

-https://bit.ly/exterioradhesives

How To Build A Wheelchair Ramp –

-https://bit.ly/wheelchairrampplans

SUBSCRIBE:

-http://bit.ly/BLRchannel

WATCH MY POPULAR VIDEO: How to Cut Perfect Miter Joints

-https://youtu.be/0wnjJ-Xi5FU

WATCH MORE BAILEY LINE ROAD:

Winter Tips –

-https://bit.ly/2rpnUcm

Product Tours –

-https://bit.ly/2L2H54Q

Woodworking –

-https://bit.ly/2RN83jC

Real Rural Life –

-https://bit.ly/2RI5dvY

CHECK OUT MY WEBSITE:

-https://baileylineroad.com/

My Cabin Building Course:

-https://baileylineroad.com/cozy-cabin/

How-To \u0026 DIY eBooks:

-https://baileylineroad.com/shop/

SOCIAL MEDIA:

-http://bit.ly/STEVEMyoutube

-http://bit.ly/STEVEMfacebook

-http://bit.ly/STEVEMtwitter

-http://bit.ly/STEVEMinstagram

-http://bit.ly/STEVEMpinterest

#DIY #woodfinish #woodfinishing #woodworking #woodworkingideas #woodworkingclasses #woodworkingworkshop #woodworkinglove #woodworkingadvice #woodworkingtips #woodworkingskills #woodworkingweekend #woodworkingclassesonline #woodworkingmagazines #woodworkingart #woodworkings #woodworkingninja #woodworkingwednesday #woodworkingheart #woodworkingtools #woodworkingofinstagram #woodworkingclass #woodworkingman #woodworkingmachinery #woodworkingforever #woodworkingatnoon #woodworkingschool

https://in.pinterest.com/pin/one-of-the-biggest-challenges-while-working-with-wood-finishes-is-to-get-a-mirror-finish-on-the-wood-woodworkers–246853623313901713/

See more articles in category: FAQs