Best 13 how to drill a hole in stone

Below is the best information and knowledge about how to drill a hole in stone compiled and compiled by the lifefindall.com team, along with other related topics such as:: how to drill a hole in a rock, how to drill a hole in a rock for jewelry, how to make a hole in a rock without a drill, how to drill a hole in a rock with a dremel, how to drill a hole in obsidian, how to drill a hole in a boulder for a waterfall, how to drill holes in stone beads, drilling gemstones with a dremel.

how to drill a hole in stone

Image for keyword: how to drill a hole in stone

The most popular articles about how to drill a hole in stone

How to Drill into Concrete, Brick, and Stone – Thrift Diving Blog

  • Author: thriftdiving.com

  • Evaluate 4 ⭐ (34691 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Drill into Concrete, Brick, and Stone – Thrift Diving Blog Instead, you’d typically use a drill called a hammer drill. Not only does it spin the drill bit, allowing you to bore a hole into the masonry, but it has a …

  • Match the search results: Whenever you drill a hole (typically into wood or drywall, if you’re a typical homeowner), there are two things you need: a drill and drill bits. A drill simply rotates the drill bit, and with a little force when pushing on the drill, the rotating drill bit will bore a hole into the wood, dryw…

  • Quote from the source:

Tips for drilling stone – Coolblue – anything for a smile

  • Author: www.coolblue.nl

  • Evaluate 4 ⭐ (39753 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Tips for drilling stone – Coolblue – anything for a smile The screw won’t have any grip. For the diameter of the drill hole, you have to consider the diameter of the plug you want to place the screw in.

  • Match the search results: Every drill job needs the right drill bit. Have you ever tried drilling wood with a stone drill bit? The result won’t make you happy. The same is true for drilling stone. If you try it with a metal drill bit, you won’t get much further than a little chip in a brick or the mortar. A stone drill bit i…

  • Quote from the source:

How Did They Drill That? – A Few Observations on … – EXARC

  • Author: exarc.net

  • Evaluate 4 ⭐ (31079 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How Did They Drill That? – A Few Observations on … – EXARC After roughly 80 minutes of drilling the hole was approximately 1.2 … the best drilling method was the one that employed stone drill bits.

  • Match the search results: After 5 minutes of drilling, a very shallow 0.05 cm deep oval shape was observed forming on the surface of the antler. After 15 minutes, the hole was approximately 3 mm deep and an inner core had started to form. After that, the drilling became increasingly harder; the contact area between the drill…

  • Quote from the source:

How to Hand Drill Holes in Stone and Concrete – Core77

  • Author: www.core77.com

  • Evaluate 3 ⭐ (14284 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Hand Drill Holes in Stone and Concrete – Core77 A star drill is a specialized chisel used to make holes in stone, concrete, and masonry. Drilling holes with this tool involves hitting it …

  • Match the search results: You can still buy star drills but few people today would consider using one, not when electric rotary hammers are available for drilling concrete and masonry. A rotary hammer uses a motor and gears to replicate the hit/turn/hit/turn action of a star drill. Only it does it faster and with less relian…

  • Quote from the source:

How to Drill Holes in Your Tumbled Stones or Beach Glass

  • Author: www.mamasminerals.com

  • Evaluate 4 ⭐ (29254 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Drill Holes in Your Tumbled Stones or Beach Glass It will be easy to correctly reposition the stone; all you have to do is bring the drill bit down (turned off), and you’ll feel it slide across …

  • Match the search results: The next piece of equipment is optional: a drill press. Basically, it’s just a stand with a special clamp that holds the the body of the drill in place vertically, and a lever handle to move the whole thing up and down. You can drill by hand, but the drill press saves you so much stress because it k…

  • Quote from the source:

Make This: Drilled Natural Stone Jewelry Tutorial – Paper and …

  • Author: www.papernstitchblog.com

  • Evaluate 4 ⭐ (26279 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Make This: Drilled Natural Stone Jewelry Tutorial – Paper and … Not only do solid drill bits drill more slowly, you’d need to drill a small hole and then change to an ever larger bit until you widened the hole to the …

  • Match the search results: 2. Hollow, diamond-tipped coring bits – These are much faster and effective for drilling holes in pebbles than a solid drill bit. There’s also less chance that you’ll break the stone when drilling and it’s much much faster! Not only do solid drill bits drill more slowly, you&…

  • Quote from the source:

How To Drill Small Beach Stones – Jenny Hoople ⋆ Ceramic …

  • Author: jennyhoople.com

  • Evaluate 3 ⭐ (17904 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Drill Small Beach Stones – Jenny Hoople ⋆ Ceramic … Let’s Start Drilling! · Put on your goggles. · Firmly hold your beach stone on top of the piece of wood and just under the water. · Turn on the …

  • Match the search results: I’d suggest not holding the stone with your fingers under water! Too easy for things to slip, and I am sure it would not be pleasant to have one of those bits drilling through your finger! Get a small flat-head C-clamp and use it upside down to attach the stone to the board. If you attach at …

  • Quote from the source:

How to Drill Into a Stone Wall | DoItYourself.com

  • Author: www.doityourself.com

  • Evaluate 3 ⭐ (6641 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Drill Into a Stone Wall | DoItYourself.com Step 3 – Drill Holes … Use a hammer drill with the appropriate drill bit. Use water or a lubricant to cool the bit as you drill. Rest from time …

  • Match the search results: Natural stone is often a very hard material. There are stone walls made of softer kinds of stone, however, and these require a different type of bit. The most important factor in successfully drilling a stone wall is getting the right drill bit. The second most important factor is the drill itself.W…

  • Quote from the source:

How to Drill Through River Stone – HomeSteady

  • Author: homesteady.com

  • Evaluate 3 ⭐ (3284 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Drill Through River Stone – HomeSteady Select stones to drill. · Place rubber or leather scrap pieces on either side of a stone and tighten it securely in a vise. · Choose the diameter …

  • Match the search results: Fill the putty ring with water, place a diamond-tipped drill bit of the size desired in a heavy-duty power drill and secure it tightly. Position the tip of the drill bit straight down against the marker dot. Hold the drill securely with both hands to steady it and slowly start the speed. Increase th…

  • Quote from the source:

How to Make a Hole in a Rock Without a Drill – 6 Amazing Steps

  • Author: housegrail.com

  • Evaluate 3 ⭐ (20137 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Make a Hole in a Rock Without a Drill – 6 Amazing Steps To begin drilling into stone, hold your chisel at a 90-degree angle and strike the back of it with your sledgehammer. If you have multiple …

  • Match the search results: Putting a hole into a rock without a drill is time-consuming. However, it is easier than you might think and only requires a few tools. Drilling into rock can overheat many drills and destroy the bits. The stone can also be too far away to reach with an electric drill, and a cordless drill would tak…

  • Quote from the source:

how to drill holes in stones – The Blue Monkey Restaurant …

  • Author: bluemonkeysports.com

  • Evaluate 4 ⭐ (34174 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about how to drill holes in stones – The Blue Monkey Restaurant … Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a …

  • Match the search results: how to make a hole in a stone without drillinghow to drill a hole in a boulder for a fountainhow to drill a hole in a rockdrill bits for rock or stonenatural stone drill bitdrilling rock with hammer drillhow to drill holes in gemstones for jewelrydiamond drill bits for stone

  • Quote from the source:

How do you drill a hole in a stone slab? – AskingLot.com

  • Author: askinglot.com

  • Evaluate 4 ⭐ (22096 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How do you drill a hole in a stone slab? – AskingLot.com Choose a bit for the hammer drill and insert it into the hammer drill. · Place the tip of the drill bit on the stone where you will be drilling.

  • Match the search results: Also, what is the best drill bit for rock? Diamond drill bits are typically used when drilling granite, limestone, marble and any other types of hard rocks. Carbide coated bits together with spear point drills are used on softer rocks like sandstones and marble. Carbide drill bits tend to wear out …

  • Quote from the source:

How to Drill into the Rock Properly – 2021 Guide

  • Author: drillingnerd.com

  • Evaluate 4 ⭐ (27848 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Drill into the Rock Properly – 2021 Guide Hand-powered drills are used with hammers to produce holes in stone using Star Drill bits that look like chisels or punches. The cutting edge of a star …

  • Match the search results: When drilling with diamond drill bits, the key is to drill at slower speeds and lubricate the drill bit with lots of water.

  • Quote from the source:

Multi-read content how to drill a hole in stone

This Bosch BlueGranite Hammer Bits tool review is brought to you by The Home Depot.

Have you ever needed to drill into concrete or brick? Well, if you’re a homeowner, I guarantee there will come a day when you’ll have to hang something over a built-in fireplace or glue something to the exterior of your brick veneer exterior. .

I avoided drilling in brick and concrete for too long because it was one of those jobs that seemed “too difficult” or something that required me to own a bunch of tools complicated. However, lately, I can’t avoid it anymore.

Our house has plastic shutters and one of the broken nails is holding the shutters to the exterior brick veneer. The shutters, hung by a single nail in the wind, swung horizontally in front of our window. (I’m sure the neighbors were curious as to why we left it hanging for almost a week).

My husband, who also thought it would be too difficult to drill into the brick, suggested (bless him) that we just glue it back in place. As if gluing the shutters to a broken nail sticking out of the brick was a permanent fix. HA!

Although drilling into masonry is something I have never done before, but after getting my hands on a setBosch Blue Granite Hammer Drill, when Home Depot sent them to me for review, I realized that drilling into brick or concrete masonry is fairly simple and doesn’t require anything “fancy” in my toolbox other than power tools and the proper tools . There is nothing to fear and certainly nothing to avoid, like my husband and I!

How to Drill Brick or Concrete with a Bosch BlueGranite Turbo Carbide Hammer Drill

If you know very little about drilling in masonry, the first question you might ask yourself is “Can I use a regular drill to drill in concrete or brick?”

Technically, yes and no.

Anytime you drill a hole (usually in wood or drywall, if you’re a typical homeowner), you need two things: a drill and a drill bit. The drill simply spins the bit and with a little force when pressed on the bit, the rotary drill drills a hole in wood, drywall, plastic or any other material you might be drilling.

However, when drilling in concrete or brick, bothCategorydrill to use andCategoryexercise to use the modifications. Instead, you typically use an exercise called thehammer drill. Not only does it rotate the drill, allowing you to drill a hole in masonry, but it also has a built-in hammer action that allows the bit to dig in.

Second, the drill you use to drill brick, rock, or concrete will need to be a masonry drill, like those Bosch concrete and brick drills called BlueGranite Turbo Carbide drill bits.

What sets these drills apart is that they are specifically designed to drill into these tough materials.

  • The ends are arrow-shaped and blunt.
  • They are harder and these specific Bosch BlueGranite bits will last up to 5 times longer than conventional bits.
  • These bits allow you to drill faster (compared to standard bits).

Let’s see how easy it is for me to start drilling into masonry!

How to drill into concrete or brick

If you’re like me and new to drilling concrete or brick, the easiest way to get used to the job is to practice. But before you can do that, you will need all of these documents.

Drilling equipment for concrete or brick

  • Hammer drill, percussion drill or conventional dynamic drill.
  • Bosch BlueGranite wall drill.
  • Practice brick or concrete.
  • Construction screws (usually blue in color and available in various sizes).
  • Electric drill
  • Drive bits (which will allow you to drive masonry screws).
  • Painter’s tape (optional).

STEP 1: Insert the masonry bit into the drill

As I mentioned earlier, you will generally want to use a hammer drill or dynamic drill to drill into brick or concrete. But if you’re like most homeowners, chances are you only own a regular power drill. Many tool brands sell a regular dynamic drill and impact driver combo, which cuts costs compared to if you bought them individually. Look for deals during the holidays to get a set!

If you don’t have a trigger, try drilling brick or concrete with a regular dynamic drill. Although not ideal, itmaybework, especially if you’re only making one or two small holes.

If you’re doing a larger job that requires a lot of drilling in concrete or brick or thicker holes, invest in a hammer drill to make the job easier and faster. I’m surprised I don’t own a hammer drill yet! I definitely plan to add one to my collection soon!

STEP 2: Protect the brick or concrete

I took a concrete paver from my garden to practice drilling. If you don’t have anyone hanging around, head to the Home Depot and grab a practice brick. They usually cost between $1 and $2. You will want to practice drilling in concrete or brick first before attempting to drill in concrete and brick around your home! At least if you “damage” the brick, all is not lost. 😉 You’ll also want to make sure the brick or concrete is solid. Use pliers or non-slip pads so that when drilling, the masonry does not wobble and move.

STEP 3: Drill into brick or concrete

Before we talk about the size of masonry drill bits, let’s talk about pilot holes: why do you need a drill hole and how to drill one.

When drilling into wood, especially cedar (like the way I built these raised garden beds, below), it’s a good idea to drill a hole that’s slightly smaller than the screw you’re using. This pilot hole allows the screw to enter more easily, while having enough resistance. The pilot pit also protects the surrounding area. For example, cedar will crack and split if you try to drive a screw without a pilot hole.

And while masonry won’t separate and crack without a pilot hole, good luck trying to get a screw to go in there. You’ll make the pilot hole the same way: use a masonry bit that’s smaller than the screw you’ll be using.

A general rule is to hold the drill bit and screw you will be using and make sure the screw is thicker than the drill bit. Sometimes the packaging for the screw will tell you what size drill bit to use. But if not, hold them so they overlap, making sure a slightly smaller bit will work. If necessary (and possible), make a test hole:

  • If the hole is too tight, you will find it difficult to screw the screw in and it may not turn completely.
  • If the hole is perfect, the screw will sink with perfect resistance, tighten and not wobble.
  • If the hole is too big, the screw will wobble and you won’t be able to fully tighten the screw.

Below you’ll see me drilling a test hole in the brick, using the size I think is perfect for the screw I’m using. Then I realized that I needed a smaller size bit because the screw was too zigzag inside the hole.

If you’re using a regular drill, like me, you’ll notice that you’ll need a bit of pressure on the bit. Start slowly. You will notice that the carbide tip will drill into brick or concrete, attracting construction dust to clean the hole as you drill.

How deep to drill into concrete or brick?

That’s a good question. You will only want to drill as deep as necessary for the screw to fit. The wood is a bit different because you can drill 3/4 the length of the screw. But with masonry screws, you will want to drill down to the length of the screw.

I went slowly and carefully, testing these BlueGranite building tips. This is actually my first time drilling bricks! What once seemed difficult no longer seems like such a big deal. There’s always a first time for everything, right?

STEP 3: Insert construction screw and tighten

Construction screws are usually blue. Although I know what they are, I’ve never screwed into brick or concrete, so I never bought one until this shutter fell off the brick paneling of my house. I wasn’t sure what size to buy, so I bought 1-1/4″ and 2″ construction screws.

You will notice my small test hole on the left. It’s a little too big. I drilled another, smaller hole in the brick. The construction screw fits perfectly in the hole! Use an ordinary dynamic drill with a drill bit to tighten it.

Amazingly, driving a screw into brick is as easy as driving a screw into wood. It went in easily, without as much drag as I thought.

And, as silly as it sounds, I had so much success after driving my first masonry screw into that brick! HA! It is tight. I know that after successfully breaking through this brick, I am ready to deal with the plastic shutters hanging over my house.

When I felt comfortable enough to drill the brick, that’s when I drilled the brick veneer in my house. The previous nail was in the mortar, which is good because the shutters aren’t very heavy. But in general, drilling into brick is much more powerful than drilling into mortar. This is where I want to dive.

You will notice that I have tape on the BlueGranite masonry bit. The tape helps me know how deep to drill and reminds me when to stop drilling. (Never mind all those nasty cobwebs and debris behind my shutters!).

After drilling a pilot hole in the brick veneer, I drove a masonry screw through the pane and into the brick. It went well and tight! Talk about a sense of accomplishment. It’s the little things, I tell you.

Where to Buy Bosch BlueGranite Drill Bits

To purchase construction bits such as those used for drilling brick, stone and concrete, you can find them atThe reception deposit.

Did you like this article? Click here to save it to Pinterest!

Easily drills through brick, stone and concrete

I laugh to myself now thinking how nervous I was driving through masonry. Now that I’ve finished it, I’m thinking of other projects where I could use this masonry: adding a railing on my basement staircase (requires me to drill into the concrete, make a Welcome sign slab to hang on the brick wall near my front door, and more.

Have you ever drilled concrete, stone, brick?

Popular questions about how to drill a hole in stone

how to drill a hole in stone?

To avoid chipping or splitting the stone, the recommended technique is to position the drill bit at a 90-degree angle and start slowly, then gradually up the speed once it has penetrated the stone. The idea is to then replace the bit with a slightly larger diameter and make your way up through the dimensions as needed.

What is the best drill bit to drill stone?

Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.

Do I need a special drill bit for stone?

Drilling through stone, brick, granite, and even marble is possible, but it takes a tough drill bit made of hard metal to do it. Masonry drill bits are specifically designed to tackle stone and can bore through these hard surfaces with ease.

How do you drill a hole through a stone?

How do you drill a hole in stone without breaking it?

Can you use concrete drill bit for stone?

A stone drill (or a concrete drill) is a must to carry out the job as well as possible. This type of drill has a blunt tip with wings that cause the stone to be knocked away.

Will a masonry bit drill through rock?

Insert a carbide- or diamond-tipped masonry drill bit into the drill. Do this by loosening the chuck of the drill, inserting the end of the and then tightening the chuck of the drill back up. Do not attempt to use a wood bit to drill into rock, as doing so can result in the bit breaking which can cause serious injury.

What Colour is a masonry drill bit?

Masonry bits have a toughened tip which is quite different to normal twist drills. There is no special colour. Most masonry bits we use are plain grey or silver. Take a look at the screwfix website and search for masonry bits then twist drill (also called high speed steel bits).

What does a stone drill bit look like?

Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it.

Do you drill into stone or mortar?

If the brick shows signs of old age through spalling and flaws, drilling into the mortar will be better. It’s also tricky to match the color of your brick when filling holes. Mortar is easier to drill through because it’s a softer substance than brick and is also easier to patch or repair.

How do you drill a thick stone wall?

Use a coring bit as suggested but first stitch drill the wall just above where you want the hole to half the depth of the wall. Squirt expanding foam into the wall and let it set. This usually holds the loose stones in place. Drill your pilot hole thro the wall and then use the corer.

Can you drill granite with a masonry bit?

Do not attempt to drill through granite using a masonry bit, as it will not be strong enough to get through the stone. Then, you will need to place a white bottle cap (like those found on medicine bottles) over the area of the granite that you wish to drill through, making sure that the opening faces upwards.

Can you screw into stone?

Inserting a screw into stone is similar to inserting a screw into other materials, such as wood. Due to the hardness of stone, however, hardier tools and screws are required. First and foremost, you must use specially designed masonry screw anchors in stone.

Can I drill concrete with regular drill?

It is possible to drill into concrete with an ordinary rotary drill. Rotary drills take longer to drill into concrete than hammer drills and more physical effort is required. Excessive heat build-up can break the drill bit. One way to speed up the process and avoid breaking the drill bit is to keep the bit cool.

What is difference between drill and hammer drill?

The only difference you can see is that one is called a hammer drill, or a hammer drill driver to be more precise. In fact, looking closely at the hammer drill vs drill comparison reveals that these two tools remain very similar. In fact, many look identical except for the internal hammering mechanism.

Video tutorials about how to drill a hole in stone

keywords: #howtodrillintoconcrete, #howtodrillintonaturalstone, #concreteanchoradhesive, #anchorboltadhesive, #howtoscrewintostone, #howtoattachfastenerstostone, #howtodrillaholeintorock

Leah demonstrates how to drill a hole into natural stone using a hammer drill and a diamond grit masonry carbide bit. Leah in addition shows how to secure metal fasteners to natural stone or concrete with anchoring adhesive.

Drill Doctor

-https://www.amazon.com/stores/node/2590774011

If you like our vids, treat Leah to a cup of coffee!

-http://www.Ko-fi.com/seejanedrill

Click on this link to shop on Amazon via See Jane Drill:

-http://www.amazon.com/?tag=sejadr-20

Note: If you purchase any items through See Jane Drill’s Amazon links, we will receive a small commission.

If you really like the work we that we do or have been helped by our videos, consider supporting See Jane Drill on Patreon:

-http://www.patreon.com/seejanedrill

Contact Info:

Website:

-http://www.seejanedrill.com

Facebook:

-http://www.facebook.com/seejanedrill

Twitter:

-http://www.twitter.com/seejanedrill

Email: [email protected]

Disclaimer:

Due to factors beyond the control of See Jane Drill, we cannot guarantee against improper use or unauthorized modifications of this information. See Jane Drill assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. See Jane Drill recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of See Jane Drill, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not See Jane Drill.

#seejanedrill

keywords: #howtodrillholesinrocks, #howtodrillholesinrocksforjewelry, #howtodrrillholesinstones, #howtodrillholesinstonesforjewelry, #drilling, #Drill, #crafter, #crafting, #diamonddrills, #diamondbits, #howtodrillintoconcrete, #howtodrillintonaturalstone, #howtoscrewintostone, #howtoattachfastenerstostone, #howtodrillaholeintorock, #tutorial, #rockjewelry, #rockupcycle, #rockproject, #freeupcycleprojects, #upcycle, #drillaholeinstone, #diamondbit

Hi there! In this video I show you how to easily drill a hole in a rock for crafts and jewelry making. You can drill a hole in polished or unpolished stones of all types. I hope you enjoy this video. Don’t forget to like, comment, and subscribe.

Links:

Diamond Drill Bit:

-https://amzn.to/3byAHQ7

Wind Chime Video:

-https://youtu.be/YH6qm9JwqY8

keywords: #chiasẻ, #điệnthoạicómáyảnh, #điệnthoạiquayvideo, #miễnphí, #tảilên

Dremel 3000 in Canada

Dremel 3000-1/24 Variable-Speed Tool Kit

-https://www.amazon.ca/dp/B005JRJE56/ref=cm_sw_r_cp_apa_i_BkmTCbYYF2S35

Diamond Head drill bits

Yasumai 1/8″ Shank Diamond Burr Bits Set Drill Bit Kit for Craftsman Glass Gemstone Metal Dremel Grinding Rotary Tool

-https://www.amazon.ca/dp/B071DPZSVG/ref=cm_sw_r_cp_apa_i_lumTCbXTSGVEP

Bails

PandaHall About 100 Pieces 304 Stainless Steel Pinch Clip Bail Clasp Dangle Charm Bead Pendant Connector Findings Length 11×3.5mm for Jewelry Making

-https://www.amazon.ca/dp/B07GYNWY2Z/ref=cm_sw_r_cp_apa_i_slmTCb3FG9DMH

ArtResin

ArtResin – Epoxy Resin – Clear – No Respirator Needed – 8 oz (236 ml)

-https://www.amazon.ca/dp/B01BX6893Y/ref=cm_sw_r_cp_apa_i_emmTCb01KGHF4

Resin tutorial

-https://youtu.be/76K9Exf-v6Q

Lets rock this!!!

Find me on facebook to see what I have created in the past😁

-https://www.facebook.com/rachelspaintedrocks/

Etsy if you want to purchase😁

-http://etsy.me/2mUN6F6

Instagram- @rachelsrocks11

Rachel’s Rocks on Pinterest😁

keywords: #drillholeinrock, #howtodrillrock, #howtodrillintorock, #stonedrilling, #howtodrillaholeinrock, #drillrock, #drillingintostone, #howtodrillholesinrocks, #drillingintorock, #drillingholesinrocks, #drillingrock, #drillingstone, #howtodrillaholeinarock, #makingholesinrocks, #howtodrillstone, #rockdrilling, #diamonddrillbits, #makeholdinstone, #makingasinkoutofstone, #makeastonesink

Drilling Holes in Rocks. Using a diamond drill bit and drill press Levi shows you how to build a simple dam to keep a pool of water around the drill bit to keep it cool. Also how he uses a diamond bit in a die grinder and a dust extraction system to keep the shop clean.

DOWNLOAD DIY PATTERNS

🔥ETSY:

-https://www.etsy.com/ca/shop/Drawbridgeprops

🙏PATREON:

-https://www.patreon.com/drawbridgeprops

POWER TOOLS

► Makita Power File:

-https://amzn.to/2qYEX4g

► Makita 9005B 5-Inch Angle Grinder:

-https://amzn.to/2OvfPPi

► Bosch Drill and Impact Driver:

-https://amzn.to/31wNmhn

► Foredom Rotary Tool:

-https://amzn.to/2Khoa5p

► Glue Gun:

-https://amzn.to/2KfIXGK

► Buy Diamond Drill bits here:

-https://amzn.to/2CI0Nzf

VIDEO GEAR

► Canon 80D:

-https://amzn.to/2HxdGNL

► Canon EF-S 18-135mm:

-https://amzn.to/2FhwsXd

► Canon EF 50mm:

-https://amzn.to/2UyB5HM

► Canon EF 100mm:

-https://amzn.to/2SnOjEG

► Canon EF-S 10-18mm (VLOG Lens):

-https://amzn.to/2HuQ6B4

► Joby GorillaPod (Bendy Tripod):

-https://amzn.to/2Jq2KSm

► Manfrotto Tripod with Video Head:

-https://amzn.to/3bi67tr

► Andoer GVM GP-80QD Slider:

-https://amzn.to/2qZtXUo

► RODE VideoMic Pro:

-https://amzn.to/2vYqXOn

—— As an Amazon Associate I earn from qualifying purchases ——

SOCIAL MEDIA

🛡️WEBSITE:

-http://www.drawbridgeprops.com

🛡️FACEBOOK:

-https://www.facebook.com/drawbridgeprops

🛡️INSTAGRAM:

-http://www.instagram.com/drawbridgeprops

🛡️PINTEREST:

-http://www.pinterest.com/drawbridgeprops

🛡️IMDB:

-http://www.imdb.com/name/nm1976672/?r

🛡️TWITTER:

-https://www.twitter.com/drawbridgeprops

🛡️TEESPRING:

-https://teespring.com/stores/drawbridgeprops

I’m Levi Woods, an Armorsmith and artist working in Vancouver, British Columbia. I love creating new videos to share my shop creations with you. I love all fantasy, medieval and science fiction movies and especially love crafting arms and armour for costumes and props departments. I’ve been building custom armor since 2000 and have worked as a professional movie prop costumer all over the world. When I’m home in my shop I love building art out of wood, metal and leather and love to explore new techniques. I focus on crafting custom leather and metal armor for my clients who use them for Films, SCA, LARP, Renaissance Festivals, Cosplay, Costume Contests, and Private Collections. As an artist and craftsman, I am inspired and influenced by artisans and crafts people throughout different cultures and history. Join me on my journey of learning and creating as I craft handmade items. “Subscribe now and let’s get over to the bench!”

Levi Woods, Armorsmith

Subscribe:

-https://www.youtube.com/c/Drawbridgeprops_and_armoury?sub_confirmation=1

#drill #rocks #drillingholesinrocks

See more articles in category: FAQs