Best 12 how to lay hexagon floor tile

Below is the best information and knowledge about how to lay hexagon floor tile compiled and compiled by the lifefindall.com team, along with other related topics such as:: how to lay hexagon tile on wall, hexagon tile layout tool, hexagon tile floor, which direction to lay hexagon tile, hexagon tile shower floor, hexagon tile layout patterns, how to finish hexagon tile edges, how to grout hexagon floor tile.

how to lay hexagon floor tile

Image for keyword: how to lay hexagon floor tile

The most popular articles about how to lay hexagon floor tile

How to Install Hexagon Floor Tile – AT Improvements

  • Author: atimprovements.com

  • Evaluate 3 ⭐ (13106 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Install Hexagon Floor Tile – AT Improvements Begin to place your hexagon tiles down into the thinset, pressing down firmly to ensure that you have good coverage on the bottom of the tile.

  • Match the search results: As previously mentioned, you want to use enough spacers to maintain uniform spacing between each tile. Although spacer installation is a pretty straightforward part of most tile installation jobs, it is a bit trickier for hexagon tile installations. Unlike square or rectangular tiles where one space…

  • Quote from the source:

How do I install large hexagon tiles on a floor?

  • Author: myersflooring.com

  • Evaluate 3 ⭐ (19531 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How do I install large hexagon tiles on a floor? In this article, you’ll get step-by-step instructions (with pictures) on how to install large hexagon tiles on a floor, as well as some …

  • Match the search results: best contractor tools, how to install a tile floor, how to install tile, how to tile diy, how to tile for beginners, How-To, innovative contractor tools, smart spacer, specialty tile spacers, specialty tile tools, Tile Installation, tile spacer, tools for installing tile

  • Quote from the source:

DIY bathroom reno, phase 6 – laying hexagon tiles without …

  • Author: www.kelleyrosewaller.com

  • Evaluate 4 ⭐ (23657 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about DIY bathroom reno, phase 6 – laying hexagon tiles without … Even to lay across an imaginarily-perfectly-straight floor or wall, you’re cutting every other tile. Our neighbor did ask if we were tiling …

  • Match the search results: We decided a tile break would be the way to go. And we were wrong. This only worked cutting the tiles perfectly in half. Anything that adjusted for the slightly leaning walls of an old house or had to go around something and we were shattering and wasting tiles.

  • Quote from the source:

Installing Hexagon Tile for Beginners – Remodelaholic

  • Author: www.remodelaholic.com

  • Evaluate 4 ⭐ (22724 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Installing Hexagon Tile for Beginners – Remodelaholic Use the right size and type of “trowel” for the tile you’re laying to spread your thinset. Read and follow the directions. If the thinset needs …

  • Match the search results: I just installed a tile floor in my bathroom with white hexagon tiles and found that pennies worked perfectly as spacers. You can also rent a tile saw and nippers to trim the tiles to fit nicely against the wall, tub, and around plumbing. After the tile has been laid (but well before the mortar is d…

  • Quote from the source:

Pros and Cons of Hexagon Tiles

  • Author: www.tilewizards.com.au

  • Evaluate 3 ⭐ (2352 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Pros and Cons of Hexagon Tiles The big con of hex tiles is the fact that they are quite challenging to install, so they are not the best option for inexperienced DIYers. It is still doable, …

  • Match the search results: This process is automatic. Your browser will redirect to your requested content shortly.

  • Quote from the source:

Hexagon Tile

  • Author: www.tileshop.com

  • Evaluate 3 ⭐ (10944 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Hexagon Tile Hex tile is available in ceramic, porcelain and natural stone, as well as in a variety of sizes, starting from 1- and 2-inch hexagon tiles and going up to 12- …

  • Match the search results: Trendy hexagon tile is a vintage look that’s new again, making it a great fit for old home updates and new homes alike. It’s a unique shape but is simple enough to blend into a design. And the variations are endless. Hex tile is available in ceramic, porcelain and natural stone, as well …

  • Quote from the source:

What’s Trending: Style with Hexagon Tile Patterns – Vevano

  • Author: vevano.com

  • Evaluate 3 ⭐ (9882 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about What’s Trending: Style with Hexagon Tile Patterns – Vevano Many hexagonal tiles come rated for use as a flooring option. Hexagon floor tile, in general, is one of the most durable flooring options …

  • Match the search results: Tile can be made of natural stone, porcelain or ceramic tile, glass, and even metal–and sometimes multiple materials and finishes in one tile design. On top of that, tile can be designed to look like almost any material imaginable, from wood to metal, matte marble to glossy marble, and even stone a…

  • Quote from the source:

Hexagon Tiles | Atlas Concorde USA

  • Author: www.atlasconcordeusa.com

  • Evaluate 4 ⭐ (21454 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Hexagon Tiles | Atlas Concorde USA Hexagon tiles · CLASSIC & MODERN SHAPE · PERFECT FOR FLOORS, WALLS & BACKSPLASHES · MULTIPLE LOOKS WITH COLORS, GROUT & GEOMETRIES · EASY TO INSTALL …

  • Match the search results: Choose from 19 stunning SKUs from four different collections, to cover your design from every angle. 

  • Quote from the source:

Hexagon Laundry Room Tile #thetileshop @thetileshop

  • Author: www.simplydesigning.net

  • Evaluate 3 ⭐ (7888 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Hexagon Laundry Room Tile #thetileshop @thetileshop You will spread thinset directly onto your backer board and then you will hold the notched trowel at a 45 degree angle to the floor to create …

  • Match the search results: Lay Your TileI’ve talked before (here) about different ways to install your tile: from back-buttering your tile to applying the thinset directly to the floor, you can read more about your options HERE.  But because this was a fairly small room with uncomplicated cuts, we knew we could completel…

  • Quote from the source:

Laying Small Hexagon Tiles – Home Guides

  • Author: homeguides.sfgate.com

  • Evaluate 4 ⭐ (33450 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Laying Small Hexagon Tiles – Home Guides Most small hex tiles come mounted on flexible mesh sheets. Apply thinset to an area large enough to install three or four sheets at a time instead of covering …

  • Match the search results: Small hex tile sheets fit together in an interlocking, honeycomb pattern with an irregular border. This allows you to interlock the sheets like puzzle pieces. The simplest hex design is a contiguous field of the same color tiles, usually white or pale cream, and you can add accents or a border. Blac…

  • Quote from the source:

Quick Answer: How To Lay Hexagon Floor Tile

  • Author: www.seniorcare2share.com

  • Evaluate 3 ⭐ (19884 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Quick Answer: How To Lay Hexagon Floor Tile Are hexagon tiles hard to lay? Where do you start when tiling a floor? How do you measure a hexagon tile? What is the best tile Levelling system? Can …

  • Match the search results: The 10 Best Tile Leveling Systems: Raimondi Leveling System Starter Kit – Best Overall. QEP 99722Q LASH Tile Leveling – Best Value. Perfect Level Master Tile Leveling System – Premium Choice. Yaekoo Tiles Leveler Spacers Lippage Tile Leveling System. Craftsboys Tile Leveling System. Peygran Tile Le…

  • Quote from the source:

Hexagonal Tile – Wayfair

  • Author: www.wayfair.com

  • Evaluate 4 ⭐ (23586 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Hexagonal Tile – Wayfair Shop Wayfair for all the best Hexagonal Tile. Enjoy Free Shipping on most … Home/; Home Improvement/; Flooring, Walls & Ceiling/; Floor Tiles & Wall Tiles …

  • Match the search results:
    Our systems have detected unusual traffic from your computer network. This page checks to see it’s really you sending the requests and not a robot.

  • Quote from the source:

Multi-read content how to lay hexagon floor tile

How to install hexagon floor tile

Hexagon tiles are a great way to add a unique look to a bathroom or kitchen floor. Installing hexagonal floor tiles is similar to laying other types of floor tiles. However, there are some key differences. Since each brick has 6 edges instead of 4, special care must be taken to ensure grout spacing is maintained between each brick.

To install a hexagonal tile floor, you will need to follow these general steps:

  1. Prepare the base of your hex tile
  2. Plan and prepare your tile layout
  3. Choose the Best Hexagonal Floor Tiles for Your Space
  4. Buy materials and hexagonal bricks
  5. Tighten your first hexagons
  6. Thin Grout Mix and Preparation for Hexagon Tile Installation
  7. Install your hex tiles
  8. Locate your cache and tile upgrade system
  9. Allow bricks and mortar to harden for 48 hours
  10. Grout removal and tile leveling system
  11. Install grout

This article will show you step by step the process of installing hexagonal tiles. If you are more of a visual learner, please check out my “Installing Hexagon Flooring” video below:

Step 1: Prepare the base coat for your hexagonal tiles

Before you can begin the process of installing hexagonal tiles, you need to ensure that you have a suitable substrate for your tiles. The term “substrate” is simply defined as the layer under your paving.

Although most flooring (hardwood, laminate, LVP, etc.) is installed directly into your homeplywood subfloor, tiles require additional substrate preparation. Since plywood can swell, expand and warp when subjected to water, it often makes a poor substrate for bricks, as the brick/mortar can crack when subjected to this expansion and to this contraction.

Instead, cement board (Hardibacker, Durock, Wonderboard, etc.) is often used as a tile base because it is durable, water resistant, and does not expand, contract, or warp not when exposed to moisture.

There are many brands of cement board, each with its pros and cons. For more information on the different types of cement board and installation details, seeBlog “How to install a cement board” here.

In addition to cement board,Kerdi Ditra separation membrane.Also a popular brick substrate. For more information on installing Kerdi Ditra refer to my Youtube videothis.

If you need help deciding between a cement board and a Schluter Ditra, check out my Schluter Ditra VS Cement Board comparison article.link here.

2nd step:Plan and prepare your tile layout

Before you lay your first hexagonal floor tile, you need to plan and set up your tile layout. When planning your hexagonal cell layout, you want to follow these general rules:

  • Avoid leaving small pieces of tile along the wall. If you find you will have a small piece of brick on one wall, consider cutting a piece of brick on the opposite wall first. This will help you standardize your settings and make everything look uniform and neat.
  • Minimizes the number of complicated cuts required. This is easier said than done, but try to map out your tile layout so you don’t have to cut out a lot of detail in corners, around obstacles, etc.
  • Consider the direction of the hexagonal tiles. Hexagonal studs can be positioned either with the “dot” of the cell in line of sight, or with the right face of the stud positioned in line of sight. See below:

The “tip” of the hex tile in line of sight Right side of the tile in line of sight

  • Start your layout at the back of the room where you are tiled and walk out of the room. You don’t want to walk on freshly installed tiles – so by installing the tiles at the back of the room first, you can finish at the entrance to the room.
  • Leave a 1/8″ gap between the floor tiles and the wall. This is to allow for expansion and contraction. This space will be filled or covered with baseboards.

Step 3:Choose the Best Hexagonal Floor Tiles for Your Space

Hexagon tiles are available in a variety of sizes and designs. If you have a large space to tile, you may want to consider large format hexagonal tiles (i.e. 14″x16″). However, if you have a small space, hexagonal mosaic panels may be better suited for your application. See examples of both types of hex tiles below:

Large Hexagonal Tiles Small Hexagonal Mosaic Tiles

The size and type of tile you choose will depend on the size of the room and your personal preferences. This article focuses primarily on laying large format hexagonal tiles. If you are looking to install smaller hexagon mosaic tiles (typically used in bathrooms) you may want to watch my hexagon mosaic tile installation video below:

Step 4:Buy materials and hexagonal bricks

Once you’ve decided on the type of hex tile you want to use, it’s time to purchase all the tools and materials you’ll need for a successful hex tile installation. To complete the installation of the hex tile, you will need the following tools and materials:

  • Hexagons (quantity needed is based on your square footage)
  • Tile saw (water saw, Dremel tool, speed cut or angle grinder)
  • thin mortar
  • Plaster (size based on tile manufacturer’s recommendations)
  • Tile spacers
  • Brick leveling system (optional)
  • Sponges
  • Glue scrub

While most of these tools and documents are pretty self-explanatory and are covered in the following sections, let’s take a closer look at some of the following:

Tile saw:

For a successful installation of hex floor tiles, you will need a way to cut your hex tiles. For most hex tile installations, I recommend using a wet saw (which I usually use) or a quick cutter. Refer to the images below which show two different ways to cut the recommended tiles:

Cutting tiles with a wet saw

Usually, you can rent a wet saw for an affordable price at your big box store.pressure cutterThen there is the wet saw which is a bit cheaper and can usually be purchased for around $50. You can also use an angle grinder or Dremel tool to cut hex tiles, but this is not recommended. For more detailed instructions on how to cut tiles, check out my “How to Cut Tiles” blog.

Tile Coating and Leveling System:

Tile SpacersTile spacers

Tile spacers are available in a variety of sizes and designs depending on the look you want. Simply put, they are used to maintain even spacing between each cell. On the other hand, a tile leveling system is used to ensure that all the bricks are even on the surface. Basically a tile leveling system is used to make sure you don’t have any high spots or “cracks” in the floor.

For most hex tile installations, I recommend a 2-in-1 tile support and leveling system such asSpin Doctor upgrade system.This system ensures uniform spacing between each tile and significantly reduces the risk of tile detachment.

Now go to step 5 and start dry laying the hexagonal floor tiles.

Step 5:Dry Fit Your First Hexagon Tiles

At this point in the hexagonal tile installation, you will actually begin to cut and position your tiles in the correct position.DO NOT HAVEUse any grout. At this point, you only need to do a dry fit composition to ensure that all cuts have been made correctly and that each brick will fit snugly. Be sure to include your spacers between each tile when dry laying.

To install your first row of hex tiles, start at the end of the room and cut the hex tiles as needed to have a straight line along the back wall. See below:

Establish Straight line cuts of the Hexagon Tile along the Back Wall Placing straight cuts of the hex tile along the back wall

To cut the hex tiles I used a wet saw as shown above.Again, be sure to include your tile spacer in your drying kit.The idea is to arrange the cellsEXACTLYHow will you do the actual installation – minus the grout.

Continue to dry fit each brick (cutting if necessary) until you have them all positioned.

Dry Fit each tile using Tile Spacers as NeededThoroughly dry each brick using spacers as needed

Once all the bricks are dry and in place, use a piece of tape to label each tile so you know where each tile is. You also don’t need to take a picture of the cell layout just to be on the safe side.

Label Each Tile Using Masking Tape so That you Know Where They are supposed to goLabel each brick with tape so you know where they go

Once each tile is labeled, remove it and vacuum the area to remove any debris that may affect the installation of the hex tiles.

Vacuum the area to make sure that there is no debris Vacuum the area to make sure there is no debris

Step 6:Mix Thinset Mortar and Prepare for Hex Tile Installation

At this point in the hex tile installation, you will permanently bond the hex tile to the surface using a thin-set mortar. Follow the manufacturer’s instructions for adding and mixing water and mixingthin mortar.

Mix up your Thinset Mortar in accordance with the Manufacturer's instructionsMix your thinset mortar according to the manufacturer’s instructions

Once the Thinset is thoroughly mixed, use a trowel to apply it over the base coat. The size and type of trowel you use will depend on the recommendations of the tile manufacturer. Usually a1/4 inch square trowelwill be used for hex tile installation, but confirm based on your tile selection.

Start at the bottom of the room and coat the surface with a fine grout using the “direction trowel”. This means that all flight paths must be in the same direction. Apply only enough thin coats of mortar for one row at a time. You want to make sure you have enough space to move around and work.

Step 7:Install your hex tiles

Begin laying your hex bricks in a thin layer, pressing firmly to ensure you have good coverage on the bottom of the brick. You have to lift a few bricks to make sure you have a good, thin layer of grout. Otherwise, you may want to “steal” your tiles. Back-buttering consists of applying a thin layer of mortar under the bricks before setting them in place.

When placing your bricks in the underlay, make sure you have used enough flat spacers/pads to prevent peeling and make sure the spacing between each tile is even.

Continue installing grout, tile, and thin spacers in established locations with your taping and drying efforts.

Apply thinset mortar to the substrate, install hexagon tiles, and position tile spacers/leveling systemApply a thin coat of mortar to the surface, install the hexagonal tiles and position the tile leveling/leveling system

PRO TIP: Clean as you go! Be sure to immediately clean up any thin grout on the tile surface. Also, make sure there is no thin grout buildup in your grout. Once this paint dries, it becomes exponentially harder to clean. Use a damp sponge to help remove any thin layers of paint before it dries.

Step 8:Your location buffer and tile leveling system

As mentioned earlier, you want to use enough buffer to maintain even spacing between each cell. While installing spacers is a fairly straightforward part of most tile installation jobs, installing hex tile is a little more involved. Unlike square or rectangular tiles where one spacer per facet is usually sufficient, hexagonal tiles may require additional spacers.

As you can see in the photo below, sometimes multiple glides and levelers may be required for an even installation without any ledges.

many spacers and tile levelers can sometimes be required for a uniform installation without any lippage. Multiple spacers and tile levelers may sometimes be needed for a uniform installation without any supports.

Step 9:Allow brick and mortar to harden for 48 hours

Allow thinset mortar to dry

After installing all of your hexagonal floor tiles, do not walk on them for 24-48 hours. Allow the thin grout to set and harden according to the manufacturer’s recommendations. Make sure you don’t mess up your tile installation by trying to walk on the tile again or removing the grout sooner!

Step 10:Grout removal and tile leveling system

Once this layer has fully cured, remove the spacers and leveling system from the tiles by tapping them with a rubber mallet in the direction of the grout line. If done correctly, the spacers should separate easily from between your hexes.

Remove tile spacers and leveling system with a firm strike of a rubber malletRemove the spacers and tile leveling system with a firm blow of the rubber mallet

Then remove the label from your tile and wipe any dust or contaminants from the tile.

 Sweep up any dust or contaminants from the tile.  Wipe dust or dirt from the tile.

Finally, make sure there is no thin, dry grout on the tile surface or in the grout lines. If you have a bit of dry paint on your tiles or in your grout, it’s not the end of the world. You can scrape off any debris on the tile surface using5 in 1 tool.Just make sure you don’t scratch the tiles!

Any thin layer of grout that adheres to the grout line can be removed withgrout tool.

Step 11:Install grout

At this point, you are ready to grout and finish installing your hex tile. Before grouting, be sure to thoroughly clean the tile surfaces. Also, you should vacuum the entire surface of the tiles, especially between the joints.

There are different types, styles and colors of grout – so be sure to choose the right grout for your application.Glue scrubis best for grout lines over 1/8 inch andunbreaded groupert is best for grout lines 1/8 inch and smaller. Remember that sanded, unmixed grout is porous in nature. Therefore, you will have togrout glueto make it waterproof.

If you are installing your hex tiles in the bathroom, epoxy grout may be a better choice due to its durability and superior moisture resistance. If you choose to use epoxy grout, I recommend watching my epoxy grout installation video below:

After choosing your grout, mix it according to the manufacturer’s recommendations. Apply the mortar usinggrout glue, attach it to all grout lines.

Apply Grout to grout lines by holding your grout float at a 45 degree angleApply the grout to the grout lines holding your grout at a 45 degree angle

After filling all joints with grout, remove any excess grout using your grout float held at a 90 degree angle. Finally, use a sponge andremove grout dust(optional) to clean all grout from the face of the hex tile.

At this point, all that’s left to do is give your grout time to harden according to the manufacturer’s recommendations. Once the grout is dry, your hex tile installation is complete!

Conclusion:

Completed Hexagon Floor Tile Installation Complete installation of the hexagonal floor

Installing a hexagonal floor tile is a rewarding DIY project that can add more character to any room. By following the steps in this article, you can easily complete your own hexagonal tile installation. Good luck!

Thank you so much for looking at ATIpromotions! If you learned anything from this project, you might also like these other DIY projects:

How to cut a cast iron pipe:How to cut a cast iron pipe and replace it with PVC-AT.

How to patch a hole in concrete:How to patch a hole in concrete – (atimprovements.com)

To see the full time frame of the bathroom transition,Click here!

Thank you!

DISCLAIMER: This is for reference only. Links included in this article may be affiliate links. If you purchase a product or service using the links I provide, I may receive a small commission. No additional costs for you! Thank you for supporting ATimprovements so that I can continue to provide you with free content every week!

Popular questions about how to lay hexagon floor tile

How do you layout a hexagon floor tile?

Are hexagon tiles hard to lay?

The big con of hex tiles is the fact that they are quite challenging to install, so they are not the best option for inexperienced DIYers. It is still doable, of course, but make sure you have plenty of time, patience and attention to detail.

Which way does hexagon tile go?

And because hexagons are a natural shape, they’ll always be in style. Where should I start hexagon tile? Lay tile so that the cuts that are most visible still look nice.

How do you install Hexagon flooring?

Which way should tiles run?

You should tile the floor the opposite direction of the rectangle tiles. You don’t want rectangle tiles in rectangle direction in a rectangle room. It will look like a narrow hallway. Laying the tiles the opposite way will balance out the size of the room.

How do you measure a hexagon tile?

Some manufacturers measure the hex shape from point to point while others measure from flat side to flat side. A 3-inch hexagonal piece that’s measured point-to-point won’t be the same size as one measured side to side. Some manufactures provide both measurements.

How much space do you need between hexagon tiles?

Recommended spacer for hexagons:

I VERY highly recommend using the Smart Spacer (above) for installing hexagons. It will allow you to install the tile with 1/16″, 1/8″, or 3/16″ joint sizes, use them in place of wedges if you need to, and won’t compress!

How do you install hexagon mosaic tile?

Will grout fix uneven tiles?

To repair uneven tiles, you need to remove the tiles and repair their base. Once you reset the tiles, you need to regrout them. Use grout that matches the original to make the repair less obvious.

How do you lay large floor tiles?

How do you lay a herringbone tile?

What size notched trowel for backsplash tile?

All tile manufacturers offer a recommended trowel size. Mosaic installations up to 2 inches can use a 1/8-inch notch, as can wall tiles of up to 4 inches, as a general rule. 16-inch tiles need a 1/2-inch-deep notch, and anything over 24 inches should use a 3/4-inch notch.

How do you install mosaic tiles with mesh backing?

How do you tile a bathroom mosaic floor?

When laying tile where do you start?

Begin laying tile in the center of the room and work your way out. The first step in laying out tile is to mark a guideline, or layout line, in the room to make sure your tile pattern is evenly centered. Measure the four walls in the room with a tape measure to find the midpoint.

Video tutorials about how to lay hexagon floor tile

keywords:

keywords: #howtotile, #tile, #diy, #doityourself, #tilefloor, #howtotileabathroom, #byotools, #starttofinish, #remodelingtilefloordiy, #howtoinstalltile, #tiling, #homeimprovement, #diybathroomremodel, #howto, #bathroomrenovation, #remodel, #bathroomremodel, #howtotileafloor, #howtotileabathroomfloor, #renovation, #tileinstallation, #tilefloorinstallation, #floortile, #tileafloor, #tilebathroom, #hexagontile, #hexagontileinstall, #howtoinstallhexagontile, #tiles

This BYOT DIY project is all about how to tile a bathroom floor with hexagon tile. This project involves demo, prep and installation of tile. This DIY home improvement project is a start to finish tutorial on how you can turn an ugly old bathroom into something much nicer.

Do you link the videos and want to treat Brent to a cup of coffee?

-https://ko-fi.com/byotools

BYOT News Letter (Automatically Entered into Yearly Giveaways)

-http://byotools.me

Help Support Small Businesses That Support BYOT:

-https://bit.ly/3f1xFo7

BYOTee Shirts Available NOW!

-https://teespring.com/byotools

Instagram

-https://www.instagram.com/byotools/

Facebook

-https://www.facebook.com/byotools

TikTok

-https://www.tiktok.com/@byotools

Tool List:

-Tape Measure

-https://goo.gl/nguoOO

-Drill

-https://amzn.to/35Xohxb

-Mixing Paddle

-https://amzn.to/2DzGG6Z

-Plastic Knife

-https://amzn.to/2OhsZhP

-Ryobe Tile Cutter

-https://amzn.to/2DXBiee

-Ridgid Tile Cutter

-https://amzn.to/38cxfZb

-Ridgid LevelMax Spacers (White)

-https://amzn.to/2Ptbiwj

-Ridgid LevelMax Spacers (Orange)

-https://amzn.to/2NiGWMq

-Wedge Spacers

-https://amzn.to/2Rywcgy

-Margin Trowel

-https://amzn.to/36eqnJ6

-1/4″ Trowel

-https://amzn.to/2YvId7W

-1/8″ spacers

-https://amzn.to/2P4h5K6

-Horse Shoe Spacers

-https://amzn.to/340p1jM

Material List

-Mosaic Tile

-https://amzn.to/2YmAnPv

-Thinset

-https://amzn.to/2R5OUMa

-SpeedSet

-https://amzn.to/35WiYhA

-Red Guard

-https://amzn.to/2P2LiaX

-Painters Tape

-https://amzn.to/2RuvKj3

#byot #howto #diy

keywords: #hexagontileinstallation, #howtotile, #howtotilebathroomfloorwithhexagontiles, #howtotilebathroomfloor, #ditra, #tile, #hexagontile, #hexagontiles, #schluterditra, #howtoinstallhexagontiles, #howtoinstallbathroomfloortiles, #bathroomfloortile, #howtocuttile, #howtotileabathroomfloor, #bathroomtile, #hexagon, #howtotileabathrrom, #howtotileabathroom, #howtoinstalltilewithditra, #howtoinstallditra, #hextile, #hextileinstallation, #bathroomfloor

Hexagon TILE installation [How to TILE bathroom floor with Hexagon Tiles]

This video will show step-by-step how I completed my hexagon tile installation on my bathroom floor. Specifically, this video will show you how to tile a bathroom floor with hexagon tiles.

Step by Step, this video explains:

– How to plan out your Hexagon tile pattern and desired orientation

– How to cut hexagon tiles

– How to dry fit your tiles

– How to install tile spacers using the Spin Doctor tile spacer system.

– How to mix the mortar and thin set to bond your tiles to the Schluter Ditra.

– How to install a marble threshold in the doorway.

– How to remove the tile spacers

I AM NOT A PROFESSIONAL TILE LAYER. This is just a step-by-step documentation of how I completed this project DIY style!

Affiliate Links to Products in video:

Schluter Ditra:

-https://amzn.to/3r9zjdm

Blue Hawk Tile Cutter:

-https://amzn.to/3qLrdaC​

Dremel Tool:

-https://amzn.to/369YXGO​

Dremel diamond blade wheel:

-https://amzn.to/3sPuQ0U

Schluter Kerdi Shower System:

-https://amzn.to/39PgaWX​

Schluter “All-set” thinset:

-https://amzn.to/3nXLacd​

Schluter “Jolly” Tile Profile

-https://amzn.to/3oon2zS​

1/4″ x 3/16″ V-notch trowel:

-https://amzn.to/3oXvDdT​

This is Episode 6 in my bathroom Remodel Series in which I took my dated half-bath and completely converted it into a full bathroom.

Link to Episode 1 (Cement board installation) is below:

-https://youtu.be/5_vw0uanZEA​

Link to Episode 2 (Kerdi waterproofing membrane installation) is below:

-https://youtu.be/5_vw0uanZEA​

Link to Episode 3 (How to tile a shower pan)

-https://youtu.be/aZn1owm0Sto​

Link to Episode 4 (How to tile a Herringbone Shower)

-https://youtu.be/IHfl6a66rO8​

Link to Episode 5 (How to tile a shower Niche)

-https://youtu.be/DmTKjWuw-pw

You might also like my rough in plumbing video that involves cutting cast iron pipe:

-https://youtu.be/edVjZwfNQyc​

Thank you again for watching! If you liked the video or want to follow the rest of the bathroom renovation journey, please SUBSCRIBE to my channel. Thanks!

keywords: #HexagonTileFloor, #installation, #install, #nj, #bathroom, #remodel, #renovation, #waterproof, #largeformattile, #schluter, #wedi, #laticrete, #porcelain, #ceramic, #naturalstone, #marble, #howto, #thinset, #mortar, #walkinshower, #hexagontileinstallation, #howtolayhexagonfloortile, #layinghexagontilesfloor, #installinghexagonfloortile, #howtoinstallhexagontilefloor, #hexagontiles, #hexagontile, #hexagonfloortileinstallation, #hexagonwalltileinstallation, #installhexagonfloortile

In this video, I will show you how I install this Hexagon porcelain floor .

Hexagon Tile Floor is very popular these days!

Installation by Donnie D’s Tile\u0026Remodeling

Certified Tile Installer #1396

“Do you have a shower you’d like to remodel? Give Donnie a call at (732) 687-5722 or visit us online at

-https://www.dtilenj.com/

Facebook:

-http://facebook.com/donniedsremodeling

Youtube:

-http://youtube.com/dtileandremodeling

Website:

-http://dtilenj.com

Instagram: dtileandremodeling

Our Information:

Donnie D’s Tile \u0026 Remodeling

Spotswood, New Jersey

08884, United States

Phone: 732-687-5722

See more articles in category: FAQs