Best 11 how to fix a pinhole in copper pipe

Below is the best information and knowledge about how to fix a pinhole in copper pipe compiled and compiled by the lifefindall.com team, along with other related topics such as:: fixing pinhole in copper pipe with solder, how to fix a pinhole leak in a copper pipe joint, how to fix a leaking copper pipe without soldering, how to fix a pinhole leak in plastic water pipe, how to detect pinhole leaks in copper pipe, copper pipe pinhole repair clamp, how to fix a pinhole leak in a steel pipe, how to find a pinhole leak in copper pipe.

how to fix a pinhole in copper pipe

Image for keyword: how to fix a pinhole in copper pipe

The most popular articles about how to fix a pinhole in copper pipe

What To Do About Pinhole Leak in Copper Pipe – Mike …

  • Author: mikediamondservices.com

  • Evaluate 4 ⭐ (35654 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about What To Do About Pinhole Leak in Copper Pipe – Mike … How to fix pinhole leak in copper pipe · Locate and mark the leak on your pipe · Turn off the water main! · Drain the pipe of water · Cut up to ½” …

  • Match the search results: Pinhole leaks are generally very small (often less than ⅛” wide) and shaped like pinholes, hence the name. A pinhole leak itself represents the final “burst through” of a worsening corrosion problem on the interior of a copper pipe. In other words, pinhole leaks are not only a problem in and of them…

  • Quote from the source:

What Are Pinhole Plumbing Leaks?

  • Author: www.provplumbing.com

  • Evaluate 4 ⭐ (24810 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about What Are Pinhole Plumbing Leaks? Copper pipes will typically last 20 or more years, but can commonly run afoul of pinhole leaks. These leaks occur only in copper piping and …

  • Match the search results: As the name suggests, a pinhole leak is a leak in a copper pipe caused by a pin-sized hole in the pipe.  Typically, these holes are less than 1/8 inch wide.  Although very small on the outside of the pipe, a pinhole leak is actually a sign of a much larger corrosion problem inside the pipe…

  • Quote from the source:

Copper Pipe Pinhole Leak Repair Service

  • Author: restoremypipes.com

  • Evaluate 3 ⭐ (10565 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Copper Pipe Pinhole Leak Repair Service How To Fix A Pinhole Leak in Copper Pipes · If you find a copper pipe leak in your water lines or elsewhere within the plumbing system, it is possible to …

  • Match the search results: There is no general difference between a copper pinhole leak and a slab leak. A copper pinhole leak can occur within your copper water pipes in the home. A slab leak can be a pinhole leak located in pipes underneath the concrete slab foundation in your home. Pinholes leaks can lead to serious damage…

  • Quote from the source:

Pinhole leak in your copper pipes? Know when to repair or …

  • Author: sila.com

  • Evaluate 3 ⭐ (4231 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Pinhole leak in your copper pipes? Know when to repair or … Unique to copper piping is pinhole leaks. Caused by corrosion, pinhole leaks are tiny holes that develop over time and can be a sign of …

  • Match the search results: Copper pinholes are slow leaks that can go undetected while they seep moisture into the insulation and wall cavity of your home. As the pinhole leak persists, the opening will become larger and the output volume of water increases. Eventually, the leak becomes more obvious and more urgent.

  • Quote from the source:

Copper pipe repair – 4 ways to fix a leaking copper pipe

  • Author: sylmasta.com

  • Evaluate 4 ⭐ (25327 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Copper pipe repair – 4 ways to fix a leaking copper pipe Copper repair epoxy putties provide one of the easiest ways to fix a leaking pipe. Epoxy putties consist of two components, a resin and a …

  • Match the search results: Useful linksPipe RepairContact usVideosAccountAbout usSylmasta News & ArticlesGDPRTerms & ConditionsModern Slavery StatementSylCreate Modelling

  • Quote from the source:

What Are Pinhole Leaks & How to Repair Them – Blair Supply

  • Author: blairsupplyusa.com

  • Evaluate 3 ⭐ (18695 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about What Are Pinhole Leaks & How to Repair Them – Blair Supply Some common materials used to repair pinhole leaks in copper include pipe repair clamps, hose clamps, c-clamps, and epoxy. Most of these repair …

  • Match the search results: The exact repair procedure used to address pinhole leaks will depend on the severity of the issue and the specific requirements of the situation. Some common materials used to repair pinhole leaks in copper include pipe repair clamps, hose clamps, c-clamps, and epoxy. Most of these repair options of…

  • Quote from the source:

No-Sweat Plumbing Repairs – This Old House

  • Author: www.thisoldhouse.com

  • Evaluate 4 ⭐ (21292 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about No-Sweat Plumbing Repairs – This Old House Hold the flexible pipe connector against the leaky elbow and mark the pipe approximately 1 in. in from each end (photo 1). Cut through the copper pipes with …

  • Match the search results: After shutting off the water and draining the system, use a putty knife to scrape away all rust, corrosion and dried gunk from the area around the pinhole leak (photo 1). Wipe the pipe clean with a cloth soaked in warm water, then dry the pipe. Next, spread open the clamp and slip it around the pipe…

  • Quote from the source:

Repair Exposed Copper Pipe | – Kiasu Plumber Singapore

  • Author: kiasuplumber.com

  • Evaluate 3 ⭐ (8830 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Repair Exposed Copper Pipe | – Kiasu Plumber Singapore Buy a sweat coupling that is used to repair ½ inch or ¾ inch copper pipes. Seal the water supply and drain the damage pipe’s line. Use a pipe cutter and cut the …

  • Match the search results: At times, the copper pipes develop a minute pinhole. However, if this minute pinhole is not treated in time, it can cause big damages. The pinhole can leak water onto other surfaces, which in turn can cause mold and rotting.

  • Quote from the source:

Fixing Pinhole Leaks in Pipes: How We Do It – Golden Rule …

  • Author: goldenrulephc.com

  • Evaluate 3 ⭐ (16062 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Fixing Pinhole Leaks in Pipes: How We Do It – Golden Rule … There isn’t much you can do to stop these small leaks from appearing in your copper pipes. A reaction between chemicals in the water is what’s …

  • Match the search results: The next type of pinhole fix is to slice open the pipe at the pinhole itself. The plumber places a pipe slicer over the section of the pipe, with the blade put into the leak. This cuts the pipe in half. The plumber then uses a compression fitting to secure the cut end of the pipe together, securing …

  • Quote from the source:

What Causes Pinhole Leaks in Copper Pipes? – No Worries …

  • Author: www.noworriesrooter.com

  • Evaluate 3 ⭐ (17723 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about What Causes Pinhole Leaks in Copper Pipes? – No Worries … How to fix or prevent pinhole leaks in copper pipes? · Check the water velocity and keep it within the suggested range · Inspect the pipe fittings.

  • Match the search results: Before looking for ways to prevent or fix pinhole leaks, it is necessary to understand what causes them. Here are a few reasons why copper pipes can experience pinhole leaks:

  • Quote from the source:

How to Fix a Leaky Copper Pipe | Rooter Guard

  • Author: www.rooterguard.com

  • Evaluate 4 ⭐ (29041 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Fix a Leaky Copper Pipe | Rooter Guard A Guide on Fixing a Leaky Copper Pipe · Step 1: Remove The Pipe That Is Damaged · Step 2: Clean Corrosion · Step 3: Slide a Repair Sleeve · Step 4: …

  • Match the search results: Before we proceed with a step-by-step guide on how to fix a leaky copper pipe, here are some tools and materials you need:

  • Quote from the source:

Multi-read content how to fix a pinhole in copper pipe

Failing-Copper

To present –

A water leak can be a very frustrating experience, whether it comes from a toilet or copper pipes that need fixing. In this handy article, you’ll learn how to prevent leaks in your copper pipes, how to get the job done quickly and efficiently with minimal tools and cost.

If a copper pipe is leaking, it’s important to find the source of the leak and take steps to fix it as soon as possible.

The longer you let a leak persist, the more likely it is to damage your home, or worse, cause injury by flooding a potentially dangerous area of ​​your home.

If you are unsure how to make these repairs, contact your local plumber for assistance.

Broken copper pipes are a common problem for many homeowners. Copper pipes can be easily repaired using a number of different techniques, but if you’re not comfortable getting your hands dirty, it’s best to call a Plumbing Express plumber.

Some houses have copper pipes in the walls, which can also cause some problems.

So the DIY patches we recommend are primarily for easily accessible copper pipes with large holes.

If you are having water leakage problemspinhole in the copper tube, then either of these may provide some short-term relief. However, pinhole leaks are often a sign of a complete failure in your plumbing system. You can read more about it in our article:Pinhole leak in a copper pan: The problem in Atlanta

Shut off the water

Whichever repair method you choose, the first thing to do is to disconnect the water supply before carrying out any repair work.

Once you have shut off the water supply, begin removing sections of piping where you think there may be a problem. Be careful not to remove too many pipes so that you can easily replace them one by one as they come out.

This type of repair is easier if there is a tear or large hole in the pipe. If you experience pinhole leaks in the copper piping, chances are you have a complete breakdown of the entire piping system.

8 Methods of repairing copper pipes

1) Solder two joints

2) Compression coupling (code approved/permanent)

3) Sharkbite slip coupling (code approved if done correctly/permanently)

4) repair clamp (not homologated/temporary code)

5) solder hole closure (unapproved/temporary code)

6) copper wire repair (unapproved/temporary code)

7) Alfa Tape (not code approved / very temporary)

8) Freeze Fix Epoxy Compound (strong chemicals that will come in contact with drinking water / code not approved / temporary)

Method

This is by far the most popular encoding method. This is the method you should use to repair a small part of a pinhole leak or an area with a large hole.

  1. Determine the area of ​​the pipe to be cut.
  2. Mark the areas to be cut out
  3. Use a pipe cutter to remove the damaged piece of pipe
  4. Use the removed piece of pipe to determine the length to cut the new piece of pipe that will replace it
  5. Cut a new pipe
  6. The break inside and outside the pipe is still installed
  7. You can use a sharp knife to do the inside
    You can use a file for external use
  8. Slip joint on each section of cut pipe
  9. These joints have no end
    This will allow you to easily slide into the existing pipe and then switch to the new section of pipe
    Joints should be the same size as the pipe
  10. Hold the spare part until the missing part
  11. Slide each fitting onto the new section so that half of the fitting is on the original pipe and the other half is on the new pipe.
  12. Repeat for the other side
  13. Then proceed to welding the two ends of the coupling and the two ends of the coupling.
  14. Eliminate excessive plumbing flow and check for leaks

Advantage:

  • Long term solution
  • Low price

Fault:

  • welding requirement
  • Not for beginners
  • Requires sufficient pipeline access

Method

This is probably the most DIY-friendly method.

  1. Determine the area of ​​the pipe to be cut.
  2. Mark the areas to be cut out
  3. Use a pipe cutter to remove the damaged piece of pipe
  4. Use the removed piece of pipe to determine the length to cut the new piece of pipe that will replace it
  5. Cut a new pipe
  6. Starting from one side, slide the retaining nut.
  7. slip on the sleeve
  8. Repeat the process for the same side of the new pipe
  9. Before tightening the retaining nut on the fitting, be sure to apply a small amount of plumbing spray to the sleeve.
  10. Tighten the retaining nut on each side of the fitting
  11. Repeat steps 5-9 for the other side
  12. If water is leaking from the fitting, you may not have tightened the retaining nuts.

If done correctly, this is a permanent, code-approved fix.

Advantage:

  • Good for beginners
  • No soldering required
  • Long term solution

Fault:

  • May leak if not installed correctly
  • Not as strong as solder

Method

  1. Use the fitting itself to determine the area of ​​pipe to be cut.
  2. Mark the areas to be cut out
  3. Use a pipe cutter to remove the damaged piece of pipe
  4. Descaling inside and outside the pipes
  5. You can use a sharp knife to do the inside
    You can use a file for external use
  6. The sliding end of the connecting pipe has been determined
  7. Then use the adjustable wrench to push back the fitting on the other end of the exposed pipe, until you can see your marks.

This method is code-approved if done correctly. It is better to repair a small hole in the pipe.

Advantage:

  • No welding
  • Good for beginners

Fault”

  • Not good for pipes exposed to the sun
  • Not as strong as solder
  • May leak if installed incorrectly

Method

  1. Determine the size of the damaged pipe
  2. Choose the right clamp size
  3. Clamp open
  4. Safety collar on pipe hole
  5. Closed snap pliers

It is a temporary solution. This is a great option if you have a small hole in your copper pipe and a plumber can’t come and fix it right away.

However, this fix is ​​not for coding. So this is only a temporary solution.

Advantage:

  • Very easy
  • Great for all skill levels
  • Best temporary option
  • No welding

Fault:

  • Do not write code
  • Temporary

Method

It only works if you have a small hole. This will be about the size of a pencil tip.

  1. Clean the pipe with an abrasive pad
  2. Apply some plumbing flux around the hole
  3. Apply some heat to the flux and the area around the hole with your hand torch
  4. You will see the plumbing flow begin to change color
  5. Use solder to patch the hole

This is not a code-approved fix. It’s only temporary. This is a possible solution to allow you to continue using your water, while waiting for the plumber to arrive and make the appropriate repairs.

Advantage:

  • Allows you to continue using the water while waiting for the plumber to arrive

Fault:

  • relating to welding
  • No one really should do this
  • Probably won’t stop running away
  • Not a fix for pinholes

Method

  1. Clean the damaged area of ​​the hose with an abrasive material such as Scotch-Brite sheet
  2. Wrap the copper wire around the hole in the copper tube and secure it in place
  3. Then solder the wire to the pipe

Advantage:

  • Allows you to continue using the water while waiting for the plumber to arrive

Fault:

  • relating to welding
  • No one really should do this
  • Probably won’t stop running away
  • Not a fix for pinholes

Method

  1. Start wrapping the tube with tape
  2. After the initial startup, it is
  3. criticize
  4. where you pull the tape tight, for each additional wrap around the pipe

Advantage:

  • No welding
  • Easy for beginners

Fault:

  • Extremely temporary solution
  • I can’t stop running away
  • no codes

Method

There are really two ways to use epoxy to repair leaky copper pipes.

You can use epoxy putty to seal the hole, or you can use epoxy to create a plaster-like bandage for a broken arm.

Here’s how to repair copper pipes with epoxy putty.

This is very similar to using a piece of gum to prevent leaks in a dam. It is most commonly used for multiple holes in pipes – most likely related to faulty piping or pipes that have reached the end of their life.

This is probably the most common repair method for pinhole copper pipes. However, it is important to remember that this is only temporary

Step 1:The epoxy will be separated into two different compounds. You will need to carefully combine the compounds. This will trigger a chemical reaction, creating a new compound. Be sure to wear protective gloves.

2nd step:Apply this compound to the visible holes in the pipe. Let dry completely.

Step 3:Wait for everything to completely dry and harden

This is not an ideal method, as strong chemicals enter drinking water. This method is not code. It should only be used temporarily, until the hose can be properly secured.

Advantage:

  • No welding
  • Easy for beginners
  • Temporary solution

Fault:

  • Toxic
  • Not good for pin leaks

Here’s how to repair a copper pipe using an epoxy sleeve.

One of the most common ways to secure copper pipes is to use epoxy sleeves. Epoxy sleeves are wrapped around the damaged area and then allowed to dry to create a tight seal. You can think of this as the equivalent of a cast arm for the pipe.

Step 1:The epoxy will be separated into two different compounds. You will need to carefully combine the compounds. This will trigger a chemical reaction, creating a new compound. Be sure to wear protective gloves.

2nd step:Apply this compound to the large hole in the pipe. Let dry completely.

Step 3:Soak the dressing in water.

Step 4:Wrap tightly around the epoxy compound

Step 5:Wait for everything to completely dry and harden

This is not an ideal method, as strong chemicals enter drinking water. This method is not code. It should only be used temporarily, until the hose can be properly secured.

Advantage:

  • No welding
  • Easy for beginners

Fault:

  • Toxic
  • Not good for pin leaks
  • Temporary

Conclusion:

You’ve probably heard of several different options for repairing leaks in copper pipes. But, what is the best solution?

The answer to this question depends on the location and extent of your leak. If you have a single hole or it is located in one area, there are many solutions that may work well for you.

However, if the problem is already prevalent in most of your plumbing, you won’t just need a quick fix, and we’re here to help!

We offer comprehensive services, from diagnosis to repair, so our customers can get their systems up and running as quickly as possible without any major issues. Call us today at 678-439-9540

Popular questions about how to fix a pinhole in copper pipe

how to fix a pinhole in copper pipe?

Because pinhole leaks are small, the easiest repair method is to fill them with epoxy putty. The best tool for the job is an epoxy putty stick, which combines the resin and the hardener in a pre-measured format. To use an epoxy putty stick, you tear off the amount of putty required and knead it by hand.

Can you repair a pinhole in a copper pipe?

What causes pinholes in copper pipe?

The primary cause of pinhole leaks is the composition of the water flowing through your plumbing system. Hard water—high amounts of dissolved calcium and magnesium—or water that is too basic (low pH) or too acidic (high pH), can all contribute to copper pipe corrosion.

How do you fix a leaking copper pipe without soldering?

Copper and PEX piping are the preferred alternatives and can be used in place of the leaking pipe by using sharkbite couplings. Start by turning off the main water line to your home and bleeding the system of water so you don’t get drenched when opening up the pipe. Then use a pipe cutter to remove the leaking section.

How do you stop a pinhole leak in a copper pipe?

A few ways to prevent pinhole leaks include knowing your pipes’ age, reducing the water velocity, checking the fittings, and installing a water softener system.

Can you solder pinhole leak in copper pipe?

The most advanced pinhole leak fix involves cutting the pipe in half. But rather than a compression fitting, the plumber will use a solder fitting for the most secure repair. The pipe must be cleaned and free from the water first or else the soldering won’t work.

Does Flex Seal tape work on copper pipes?

Yes, you can use Flex Seal on your copper pipes. Manufacturers say this product will work well on different surfaces, including copper. It will effectively seal the cracks on your pipes so you can get rid of those leaks right away.

How do you treat corrosion on copper pipes?

Make a paste of equal parts white vinegar, baking soda, and salt and apply it to the corrosion. Ten minutes later, wipe away the paste. Most, if not all the corrosion will also be wiped away. This is a temporary solution.

What does a pinhole leak look like?

The first sign you’ll probably see of pinhole leaks is spots of discoloration on the walls or ceilings. Mold and mildew appearing in odd places where there shouldn’t be water is also a warning. If you have multiple pinhole leaks, you may see a rise in your water bills.

What does a leaking copper pipe look like?

Signs Your Copper Pipes Have Pinhole Leaks

This usually appears on the outside of the plumbing pipes as a blue-green stain. If there are blue-green stains present, no matter how small, you have leaks in your copper pipe.

Can you patch copper water pipe?

When a copper water pipe corrodes and leaks, or bursts from freezing, you have to fix it fast. If the leak is pinhole-sized and less than 1/2 in. of pipe must be removed, you can make the repair by cutting the pipe and soldering (“sweating”) on an ordinary pipe coupling.

How do I temporarily fix a leaking copper pipe?

Plumber’s tape will often be the cheapest and can provide a temporary repair until a plumber can look at the issue. Plumber’s tape is water-resistant, hence the name. To apply, you simply wrap it around the area of pipework requiring repair and it will help to seal the leak.

Can you use JB Weld on copper pipes?

At least two different brands on the market — JB Weld and Harvey’s Epoxy Putty — work equally well for the purposes of stopping leaks. Both adhere best to dry surfaces and are effective for blocking small leaks in copper and galvanized steel pipe.

What is the best sealant for leaking pipes?

Our Top Picks
  • Best Overall. Gasoila – SS16 Soft-Set Pipe Thread Sealant with PTFE. …
  • Best Bang for the Buck. Dixon Valve TTB75 PTFE Industrial Sealant Tape. …
  • Best for Water. Oatey 31230 Pipe Joint Compound with PTFE with Brush. …
  • Best for PVC. Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe. …
  • Best for Gases. …
  • Best for Emergencies.

Are pinhole leaks covered by insurance?

It is essential to know that slow water leaks are not covered by your homeowners insurance policy, only those of a sudden an accidental leak. A slow pinhole leak, a dripping ice-maker or even a leaky toilet would typically not be covered under a homeowners insurance policy.

Video tutorials about how to fix a pinhole in copper pipe

keywords: #fixleakingcopperpipe, #howtofixcopperpipeleak, #copperpiperepair, #howtofixwaterleak, #copperpipepinholerepair, #emergencycopperpipefix, #fixleakdiy, #copperpipeleak, #plumbingrepair, #fixleakingcopperpipejoint, #copperpipepinholerepairkit, #howtorepairaleak, #easypipeleakfix, #stopcopperpipeleak, #waterleakfix, #waterleakrepair, #copperpipeleakfix, #emergencycopperpiperepair, #plumbingtipsandtricksofthetrade, #plumberparts, #Official

How to fix leaks or pinholes in copper pipe by using rubber and a jubilee clip, compression fittings and solder fittings. Please hit the ‘Thanks’ button if you think this helped. We also talk about how leaks can occur. These fixes are for emergency repairs when waiting for a plumber to come out and fix the leak properly….but they’ll get you by until then! Please follow me on Instagram here:

-http://www.plumberparts.co.uk/social.php?social=Instagram

🛠AMAZON TOOL STORE:

-http://www.amazon.co.uk/shop/plumberparts

🍺JOIN BEER CLUB-WEEKLY EXCLUSIVE PP LIVESTREAMS:

-http://www.youtube.com/user/plumberparts/join

📺VLOG CHANNEL:

-http://www.youtube.com/c/timeswithjames

🏠INTERACTIVE HOUSE:

-http://www.plumberparts.co.uk/interactive-house

***VISIT OUR SPONSORS***

-http://www.traderadiators.com

keywords:

keywords:

keywords: #plumbingtrick, #pexplumbinginstallation, #plumbinghacks, #plumbing, #plumbingvideos, #plumbingbasics, #plumbingrepair, #plumbingdiy, #plumbinghowto, #howtorepairplumbing, #howtosolder, #solderingcopperpipe, #howtosoldercopperpipe, #howtosweatcopperpipe, #howtosweatcopperfittings, #got2learn, #copperpipeleakrepair, #leakycopperpipe, #copperpiperepair, #howtofixcopperpipe, #fixleakcopperpipe, #howtofixaleakycopperpipe, #plumbinghack, #lifehacks

Here are 8 DIY ways to temporarily or permanently repair a leaky copper pipe. In any case, a leaky pipe can deprive you of water till a plumber can come and fix it, and knowing these techniques will allow you to turn your water back on until a proper fix can be arranged.

My web store:

-https://www.got2learnshop.com

—————————————————————————–

How to CORRECTLY solder a copper joint:

-https://youtu.be/JyVbjDsric4

—————————————————————————–

Amazon affiliate links to all the products I used in this video:

TOOLS:

Lead-free solder:

-https://amzn.to/2yPvjso

Pipe dope I used:

-https://amzn.to/2IEasNp

Deburring pen:

-https://amzn.to/2tBuhKW

Sharkbite depth gauge \u0026 deburring tool:

-https://amzn.to/2Etjjx3

FITTINGS \u0026 MATERIALS

1/2″ soldered couplings:

-https://amzn.to/2EwxSzV

1/2″ repair coupling:

-https://amzn.to/2VkLNPh

1/2″ compression fittings:

-https://amzn.to/2EctzZo

1/2″ Sharkbite slip coupling:

-https://amzn.to/2tGegDg

1/2″ Kibosh emergency pipe repair:

-https://amzn.to/2IEynwd

Pipe repair tape:

-https://amzn.to/2H07YX8

Small roll of lead-free solder:

-https://amzn.to/2ExrAA2

Epoxy Freeze fix kit:

-https://amzn.to/2Vobq1M

——————————————————————————

To become a Got2Learn Subscriber:

-https://bit.ly/2IuENO5

DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn’t done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!

https://www.pinterest.com/pin/tips-and-tricks–356417758014544749/

See more articles in category: FAQs